683035
3
Zoom out
Zoom in
Previous page
1/25
Next page
Dashboard camera Function Guide
This dashboard camera records videos and still pictures and stores them
on the microSD card (hereafter referred to as “SD card”).
Be sure to insert the SD card into SD card slot 1 before using the camera.
SD card slot 2 is extend storage capacity for normal recording data.
About the setup function
The setup menu is displayed the first time the camera's power is turned on.
Follow the instructions on the menu screen to configure the settings and complete the basic
setup related to installation. The settings can also be configured in the same way using the
setup function from the MENU settings. ( P. 31)
About the recording functions
The camera can record images while you are driving (when the camera's power is on) (normal
recording).
Furthermore, the camera can record images before and after major impacts to the vehicle or
directly after impacts while the vehicle is running or parked (event recording/parked recording).
Continuous recording
Approximately 10 seconds before impact
Arrival
Arrival
Recording is performed all the time, from when the power is turned on until it is turned o.
When the camera detects an impact, the mode switches from
continuous recording to event recording,
and the video le of the time before and after the impact was detected is saved.
When the vehicle is parked, in a parking lot or elsewhere, and the engine key is turned o, the parked
recording function is set to standby, and recording starts if an impact to the vehicle is detected.
Go
Go
Continuous recording
Event recording
Parked recording
Parked recording function Standby Parked recording starts
Impact
Event recording (for approximately 25 seconds)
Continuous recording Continuous recording
Approximately 15 seconds after impact
The time for recording after the
impact is detected can be changed.
* When there was an impact between the start time (when you left the vehicle) and the stop
time (when you got into the vehicle), recording is not possible.
The CA-DR100 power cable for Dashcam (optional
accessory) is required to enable the parked recording function.
Impact
P. 19
P. 21
P. 21
Continuous recording
Approximately 10 seconds before impact
Arrival
Arrival
Recording is performed all the time, from when the power is turned on until it is turned o.
When the camera detects an impact, the mode switches from
continuous recording to event recording,
and the video le of the time before and after the impact was detected is saved.
When the vehicle is parked, in a parking lot or elsewhere, and the engine key is turned o, the parked
recording function is set to standby, and recording starts if an impact to the vehicle is detected.
Go
Go
Continuous recording
Event recording
Parked recording
Parked recording function Standby Parked recording starts
Impact
Event recording (for approximately 25 seconds)
Continuous recording Continuous recording
Approximately 15 seconds after impact
The time for recording after the
impact is detected can be changed.
* When there was an impact between the start time (when you left the vehicle) and the stop
time (when you got into the vehicle), recording is not possible.
The CA-DR100 power cable for Dashcam (optional
accessory) is required to enable the parked recording function.
Impact
Other recording functions
Still image recording: When the [ ] button is pressed during recording, the image being
recorded is stored as a still image.
Automatic still image capture: When the [ ] button is pressed and held for over 1 second
during recording, the set number of still images is captured automatically at a specific interval.
(over 1 second)
P. 22
P. 22
P. 23
54
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-830 in the language / languages: English as an attachment in your email.

The manual is 12,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-830

Kenwood DRV-830 User Manual - German - 49 pages

Kenwood DRV-830 User Manual - Dutch - 52 pages

Kenwood DRV-830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info