683037
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
How to Install
Installation Procedure
Check that the vehicle is parked on a level
surface.
1.
Attach the device to the mount
bracket. (accessory)
Insert the mount bracket into the bracket
attachment part of the device and attach it to
the device.
Camera lens side
Mount bracket
2.
Determine where to mount the
device.
Determine the mounting position in reference
to "Recommended installation position."
3.
Clean the mounting surface and then
ax the device to the windshield.
Use a commercially available cleaning cloth or
the like to wipe off all dirt and grease on the
mounting surface. Peel off the release paper of
the double-sided tape on the mount bracket
and push the bracket against the windscreen
to affix it in place. Leave the device for 24 hours
before use to enable the mounting strength of
the mount bracket to improve.
Release paper
4.
Perform the cord wiring work.
Refer to "How to Wire" and then perform the
wiring work. (
Á
P.10)
5.
Adjust the installation angle of the
device and then x the device in place.
Turn the angle adjustment knob clockwise before
adjustment. When adjusting the installation angle,
check that the camera field of view is parallel to a level
ground surface and that the ratio of the sky and ground
are the same. After adjusting the installation angle, turn
the angle adjustment knob of the adjustment bracket
counterclockwise to fix the device in place.
Adjustment example
Angle
adjustment knob
Windshield
Rear-view mirror
If you will use the driving support
function, you need to make the
adjustments described in "Adjusting the
Settings to Match the Vehicle."
(
Á
P.12)
Adjust in a location with a level surface and
a sight distance of about 200 m.
DRV-430_B5A-0959-01_EU_EN.indd 8 2017/12/21 12:13
8


Need help? Post your question in this forum.

Forumrules
1

Forum

kenwood-drv-430

Reset search

  • Dash cam screen appears to be misted up any solutions? Have tried more ventilation Submitted on 4-2-2020 at 14:46

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-430 in the language / languages: English as an attachment in your email.

The manual is 6,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-430

Kenwood DRV-430 User Manual - German - 36 pages

Kenwood DRV-430 User Manual - Dutch - 52 pages

Kenwood DRV-430 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info