672782

Kenwood DRV-410 Manual

15
Zoom out
Zoom in
Previous page
1/100
Next page
15
Event recording
The detection of a sudden collision, unexpected collision, or other event during continuous
recording starts event recording. The recording time of event recording is the 10 seconds before
collision detection plus the time set in "Event recording time" (
Á
P.20). When event recording ends,
the mode returns to continuous recording.
•
The recording data is saved to the event recordings folder.
•
The recording time of one le is a maximum of one minute. If the recording time exceeds one minute,
the le is split to record.
•
If a collision is detected during event recording, event recording is extended.
•
When ve les will be exceeded, event recording cannot be performed (when 8 GB SD card). When
"Overwrite (event)" is set to "ON," les are deleted in order from the oldest to record (
Á
P.20). Back
up the recording data you wish to keep to a PC or other device if necessary.
Parking recording
Turning o the accessories power (ACC) turns o the power of the device and switches to parking
recording mode to perform vehicle collision monitoring. If the vehicle is subjected to a collision, the
power of the device turns on and parking recording starts. When parking recording ends, vehicle
collision monitoring resumes.
Parking recording
Collision detected
Collision
monitoring
Parking recording (set time)
Elapsed time
→
•
Parking recording mode is available only when the device is connected using the power code (
Á
P.10)
•
The recording data is saved to the parking recordings folder.
•
Parking recording starts a few seconds after the vehicle is subjected to a collision.
•
The monitor screen is not displayed during parking recording.
•
When 20 files will be exceeded, parking recording cannot be performed (when 8 GB SD card).
Delete any unnecessary data or back up the recording data you wish to keep to a PC or other device
if necessary. You can conrm whether there is an excess number of les with the "
8 Number of
les exceeded" indicator on the recording screen (
Á
P.16).
•
If parking recording is performed, a notication on the screen informs you that parking recording
has been performed when the power turns on.
•
Parking recording cannot be performed when "Recording time" is set to "OFF" (
Á
P.20).
•
Parking recording may sometimes be performed as result of detecting vibration when a door is closed.
Elapsed time
→
Continuous
recording
Collision detected
Records 10 seconds before
collision detection
Event recording (set time)
Event recording
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-410 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-410

Kenwood DRV-410 User Manual - German, Dutch, Italian - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info