The following procedure allows to record a CD within the
specified tape length so that no music is interrupted in the
middle at the ends of sides A and B.
Editing
Preparation
: Keys and control used in the operations described on this page.
1
Light the “EDIT” indicator.
2
Go to step 2 within 5 seconds.
If more than 5 seconds have elapsed,
press the key again.
Blinks.
Lights up.
Lights up.
Enter the recording time of the tape.
The CD contents are edited as follows.
(1)The tape recording time input is divided by two, and tracks that can
be accommodated in file A (which refers to tracks on tape side A) are
selected in order of their track Nos.
(2)In a few seconds, the time left on tape side A is displayed, then file
B (tracks on tape side B) is edited in the same manner.
÷The EDIT function may not operate properly for discs having only one
track or having tracks of long duration such as classical music.
(“no FILE” is displayed.)
Press the 6 key to start playback according to the edited content. The
playback pauses at the beginning of the track edited for tape side B. Press
the 6 key again to continue playback.
When recording the edited content onto a tape, it is recommended to
use the synchro recording or CCRS recording function of KENWOOD
cassette decks.
÷Do not adjust the output level from this unit particularly during record-
ing.
÷For details, see the instruction manual of the cassette deck.
Playing or recording the edited contents
÷ Load a disc in the CD player.@
÷ Press the stop (7) key to set the unit in the
stop mode.
÷ Make sure the PGM indicator is extinguished.
$
0
76
4¢
1¡
0
EDIT
TRACK
EDIT
6
1
7
2
8
3
9
4
10
5
PGM
C___
REMOTE CONTROL UNIT RC-P0715
123
456
789
0+10
Press the numeric keys as shown below.
30-minute tape:000)
46-minute tape:00006
Main unit
(Except for DPF-2030)
Remote control unit
(Except for DPF-1030)
TIME DISPLAY
0
÷By pressing the TIME DISPLAY key the set time-length intervals
will change in this order;
÷The interval length can be adjusted with the skip keys (4,¢)
in units of one minute (to a maximum of 99 minutes).
¢ : increase by one minute.
4 : decrease by one minute.
3
Press the EDIT key once again.
(Except for DPF-2030)
0
EDIT
÷When the interval length has been set using the numeric keys, the EDIT
key does not have to be pressed after the interval has been set.
The figure shows an example for the DPF-2030
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the last
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kenwood DPF-2030 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kenwood DPF-2030 in the language / languages: English as an attachment in your email.
The manual is 0,84 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
