699307
70
Zoom out
Zoom in
Previous page
1/116
Next page
Other External Components
70
4
Set each item as follows.
[Camera Assignment Settings]
Set up the camera assignment. See To set up
the camera assignment settings (P.70).
[Rear Camera Interruption]
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
[Rear Camera for Car interface]
[ON]: Select when you connected an external
system unit. Neither buttons nor titles are
displayed.
[OFF] (Default): Select when you connected a
rear camera.
[Rear Camera Settings] *
1
*
4
Adjusts the CMOS-3xx series with ID 1 ("Rear
Camera") set. For details, see the instruction
manual of your camera.
[Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
[Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.71).
[Front Camera Settings] *
2
*
4
Adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
[Front Camera Interruption] *
3
[10 sec]/[15 sec] (Default)/[20 sec]: The front
camera screen is displayed when return the
gear from the reverse (R) position.
[OFF]: Cancel.
*1 When CMOS-3xx series is connected with
this unit.
*2 To use the function, it is necessary to connect
CMOS-3xx series and to set [Camera
Assignment Settings] to [Front]. (P.70)
*3 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON], to set [Rear
Camera for Car interface] to [OFF], and
to set [Camera Assignment Settings] to
[Front]. (P.70)
*4 DNX9190DABS / DNX7190DABS /
DNX5190DABS only
Ñ To set up the camera
assignment settings
1
Touch [Camera Assignment Settings] on
the Camera screen. (P.69)
2
Set each item as follows.
[FRONT VIEW CAMERA / DASH CAM]
(Except DNR3190BTS)
Set the camera assignment from view
camera connected to Front view camera/
Dashboard camera input terminal.
[AV-IN]
Set the camera assignment from view
camera connected to AV-IN input terminal.
For Front view camera/Dashboard
camera input terminal:
(Except DNR3190BTS)
1
Touch [FRONT VIEW CAMERA / DASH
CAM].
Displays the picture from view camera
connected to Front view camera/
Dashboard camera input terminal.
2
Select the view camera to set up.
21 3 4
65
1
Picture from view camera
Displays the picture from view camera
connected to Front view camera/Dashboard
camera input terminal. (P.102)
2
[Front]
3
[Dashboard Camera]
4
[Right]
5
[Left]
6
[None]
3
Touch [Enter].
70


Need help? Post your question in this forum.

Forumrules
1

Forum

kenwood-dnx7190dabs

Reset search

  • can't get the radio stations to hold the set up required Submitted on 23-7-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DNX7190DABS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DNX7190DABS in the language / languages: English as an attachment in your email.

The manual is 9,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DNX7190DABS

Kenwood DNX7190DABS User Manual - English - 22 pages

Kenwood DNX7190DABS User Manual - German - 26 pages

Kenwood DNX7190DABS User Manual - German - 116 pages

Kenwood DNX7190DABS User Manual - Dutch - 26 pages

Kenwood DNX7190DABS User Manual - Dutch - 116 pages

Kenwood DNX7190DABS User Manual - French - 26 pages

Kenwood DNX7190DABS User Manual - French - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info