672812
27
Zoom out
Zoom in
Previous page
1/36
Next page
27
English |
Installation
MUTE
P. CONT
ANT CONT
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
REVERSE
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
PRK SW
Connect to the vehicle’s parking
brake detection switch harness.
For best safety, be sure to connect
the parking sensor.
Light Green (Parking sensor wire)
Purple/White (Reverse sensor wire)
Accessory 1
To steering remote
To use the steering wheel remote control feature, you need an
exclusive remote adapter (not supplied) matched to your car.
Connect to vehicle’s reverse lamp harness when using the
optional rear view camera.
Light Blue/Yellow
(Steering remote control wire)
Blue/White
(Power control/ Antenna control wire)
Connect either to the power control terminal when using
the optional power amplifier, or to the power terminal for the
booster amplifier of the film-type or short pole type antenna.
(Max. 300mA, 12V)
DNX8160DABS/ DNX716WDABS/ DNX5160DABS/
DNX516DABS/ DNX5160BTS
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
DNX3160BT : Not used
If no connections are made, do not let the cable
come out from the tab.
Fuse (15A)
Brown (Mute control wire)
A B C
A: Black (Ground wire)
B: Yellow (Battery wire)
C: Red (Ignition wire)
Ñ Wiring harness (Accessory 1) connector
function guide
Pin Color and function
A-4 Yellow Battery
A-5 Blue/White Power Control
A-6 Orange/White Dimmer
A-7 Red Ignition (ACC)
A-8 Black Earth (Ground) Connection
B-1/ B-2 Purple (+) / Purple/Black (–) Rear Right
B-3/ B-4 Gray (+) / Gray/Black (–) Front Right
B-5/ B-6 White (+) / White/Black (–) Front Left
B-7/ B-8 Green (+) / Green/Black (–) Rear Left
*Speaker Impedance: 4-8 Ω
#WARNING for Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on
the type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit. The default
connection for the wiring harness is described in (1) below.
If the ISO connector pins are set as described in (2), make
the connection as illustrated. Please be sure to reconnect
the cable as shown (2) below to install this unit to the
Volkswagen vehicles etc.
(1): Default setting
The red (A-7 pin) of the vehicle’s ISO connector is linked with
the ignition, and the yellow (A-4 pin) is connected to the
constant power supply.
Red (Ignition cable)
Yellow (Battery cable) Yellow (A-4 pin)
Red (A-7 pin)
Unit Vehicle
(2)
The red (A-7 pin) of the vehicle’s ISO connector is connected
to the constant power supply, and the yellow (A-4 pin) is
linked to the ignition.
Red (Ignition cable)
Yellow (Battery cable) Yellow (A-4 pin)
Red (A-7 pin)
Unit Vehicle
Ñ Connecting wires to terminals
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DNX716WDABS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DNX716WDABS in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DNX716WDABS

Kenwood DNX716WDABS User Manual - English - 22 pages

Kenwood DNX716WDABS User Manual - German - 125 pages

Kenwood DNX716WDABS User Manual - German - 26 pages

Kenwood DNX716WDABS Quick start guide - German, Dutch - 96 pages

Kenwood DNX716WDABS User Manual - Dutch - 24 pages

Kenwood DNX716WDABS User Manual - Dutch - 125 pages

Kenwood DNX716WDABS Quick start guide - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info