606268
20
Zoom out
Zoom in
Previous page
1/32
Next page
20 ñ English
Insulate unconnected wires with vinyl tape or other
similar material. To prevent a short circuit, do not
remove the caps on the ends of the unconnected
wires or the terminals.
Co
nnect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or
fail to work if you share the ¤ wires or ground them to
any metal part in the car.
Wh
en only two speakers are being connected to
the system, connect the connectors either to both
the front output terminals or to both the rear output
terminals (do not mix front and rear). For example,
if you connect the ¢ connector of the left speaker
to a front output terminal, do not connect the ¤
connector to a rear output terminal.
Af
ter the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
Mo
unt the unit so that the mounting angle is 30° or
less.
Th
is unit has the cooling fan to decrease the internal
temperature. Do not mount the unit in a place where
the cooling fan of the unit is blocked. Blocking these
openings will inhibit the cooling of the internal
temperature and result in malfunction.
Cooling fan
Do not press hard on the panel surface when installing
the unit to the vehicle. Otherwise scars, damage, or
failure may result.
Reception may drop if there are metal objects near
the Bluetooth antenna.
Bluetooth antenna unit
DNX715WDABDNX7150DAB
DNX4
Ñ Supplied accessories
First of all, make sure that all accessories are
supplied with the unit.
1
x1
2
(2 m)
x1
3
[1][2]
x1
4
[3]
x2
5
[3]
x1
6
(3.5 m)
x1
7
x1
8
(3 m)
x1
9
[1]
x1
[1]
DNX7150DAB only
[2]
DNX715WDAB only
[3]
Except DNX715WDAB
Ñ Unit
1) To prevent a short circuit, remove the key from
the ignition and disconnect the ¤ terminal of
the battery.
2) Make the proper input and output wire
connections for each unit.
3) Connect the wire on the wiring harness.
4) Take Connector B on the wiring harness and
connect it to the speaker connector in your
vehicle.
5) Take Connector A on the wiring harness and
connect it to the external power connector on
your vehicle.
6) Connect the wiring harness connector to the
unit.
7) Install the unit in your car
8) Reconnect the ¤ battery.
9) Press the <Reset> button. (P.4)
10) Perform the Initial Setup.
See First Step (P.6).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DNX4150DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DNX4150DAB in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DNX4150DAB

Kenwood DNX4150DAB User Manual - English - 131 pages

Kenwood DNX4150DAB User Manual - English - 35 pages

Kenwood DNX4150DAB User Manual - German - 35 pages

Kenwood DNX4150DAB User Manual - German - 131 pages

Kenwood DNX4150DAB Quick start guide - German - 92 pages

Kenwood DNX4150DAB User Manual - Dutch - 35 pages

Kenwood DNX4150DAB User Manual - Dutch - 131 pages

Kenwood DNX4150DAB Quick start guide - Dutch - 92 pages

Kenwood DNX4150DAB User Manual - French - 35 pages

Kenwood DNX4150DAB User Manual - French - 131 pages

Kenwood DNX4150DAB Quick start guide - French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info