672821
79
Zoom out
Zoom in
Previous page
1/90
Next page
ENGLISH 79
Error message list
If an error occurs while using the unit, a message
appears. Take appropriate action according to the
following message/remedy/cause list.
“No Signal”/“No Video Signal”:
• Start playback on the external component
connected to the AV-IN1 or iPod/AV-IN2 input
terminal (DDX8016DABS) or AV-IN/iPod input
terminal (DDX9716BTS/DDX9716BTSR).
• Check the cords and connections.
• Signal input is too weak.
“There is an error in the speaker wiring. Please
check the connections.”:
• A speaker cord has shorted or it has come into
contact with the car chassis. Wire or insulate the
speaker cord as appropriate. (Page70)
“Parking off”:
• No playback picture is shown when the parking
brake is not engaged.
“Unsupported Device”:
• The USB power voltage is abnormal.
• Turn off and turn on the unit.
• Connect another USB device.
“Cannot play this file.”:
• Check whether the file is compatible with this unit.
(Page 75)
“Connect failed.”:
• The device is paired but the connection has failed.
Connect the paired device. (Page42)
“Please Wait...”:
• The unit is preparing to use the Bluetooth
function. If the message does not disappear, turn
off and turn on the unit, then connect the device
again.
“Voice Recognition is not available.”:
• The connected mobile phone does not have a
voice recognition system.
“No Contents”:
• No phone book data is contained in the connected
Bluetooth phone.
“Antenna Error”:
• The aerial has a short-circuit and the protective
circuit has activated.
• Check the Digital Radio aerial. If a passive aerial
without a booster is used, set aerial power to
“OFF”.
Troubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with the external components,
refer also to the instructions supplied with the
adapters used for the connections (as well as
the instructions supplied with the external
components).
General
No sound comes out of the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
No picture is displayed on the screen.
• Turn on the screen. (Page8)
The remote controller* does not work.
• Replace the battery.
* Purchase KNA‑RCDV331 separately.
REFERENCES
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DDX9716BTSR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DDX9716BTSR in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DDX9716BTSR

Kenwood DDX9716BTSR User Manual - German - 88 pages

Kenwood DDX9716BTSR User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info