606274
51
Zoom out
Zoom in
Previous page
1/76
Next page
ENGLISH 51
SETTINGSSETTINGS
Setting menu items
R Displaying the <Setup> menu screen
You can change the page to display more items by
pressing [J]/[K].
You cannot change the <Audio> settings screen
when [STANDBY] is selected on the <TOP
MENU>. (Page8)
R <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
F6 to R6 (Initial: 0)
When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page44)
Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/
Powerful/iPod*
1
/User
<Loudness>
You can activate/deactivate loudness.
ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
OFF: Cancels.
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/WMV/MP3/WMA/
AAC.) The volume level will automatically increase or
decrease when you change the source.
–15 to +6 (Initial: 0)
<SW Level>
Adjust the subwoofer level.
–50 to +10 (Initial: 0)
<Bass Boost>
Select your preferred bass boost level.
OFF (Initial)/Level 1/Level 2/Level 3
<Car Setting>*
2
Select a car type and speaker location. (Page44)
Car type: Off (Initial)/Compact/Full Size Car/
Wagon/Minivan/SUV/Passenger Van
Speaker Location: Select the location of the
speakers in your car.
Front: Door (Initial)/On Dash/Under Dash
Rear*
3
: Door/ Rear Deck/2nd Row/3rd Row
<Speaker Select>*
2
Select the speaker size and adjust the crossover
frequency. (Page45)
<Position>
Adjust the sound effects according to your listening
position. (Page45)
<DSP Select>
Select whether to use the Digital Signal Processor
(DSP) system.
Bypass: Invalidates all the settings for the DSP.
Through (Initial): Uses the DSP.
<Drive Equalizer>
You can reduce the driving noise by raising the
bandwidth.
ON (Initial): Activates the Drive Equalizer.
OFF: Cancels.
*
1
Appears only when iPod is selected as the source.
*
2
When an item is grayed out, you cannot change the setting. Select
[Unlock] on the <SETUP Memory> screen to change the
setting. (Page50)
*
3
The initial setting varies depending on the car type setting.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DDX5015BTR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DDX5015BTR in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DDX5015BTR

Kenwood DDX5015BTR User Manual - German - 76 pages

Kenwood DDX5015BTR User Manual - Dutch - 76 pages

Kenwood DDX5015BTR User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info