683088
35
Zoom out
Zoom in
Previous page
1/60
Next page
SettingsSettings
<Stage EQ>
Moves the center of the sound to the lower or higher
point. Select the height.
OFF (Initial)/Low/Middle/High
*1 You cannot change the setting when “Radio” or “DAB” (only for
DDX4019DAB) is selected as the source.
*2 This function works only when “DISC”/ “USB”/ “iPod”/
“Android™” is selected as the source.
<Fader/Balance>
Touch [J]/[K]/[H]/[I] or drag the mark to adjust.
<Fader>
Adjusts the front and rear speaker output balance.
When using a two-speaker system, set the fader to the
center (0).
F15 to R15 (Initial: 0)
<Balance>
Adjusts the left and right speaker output balance.
L15 to R15 (Initial: 0)
To clear the adjustment: Touch [Center].
<Speaker/X’over>
Crossover network mode settings
Before making any settings for the speakers and
crossover frequency, select the appropriate crossover
network mode according to the speaker system (2-way
speaker system or 3-way speaker system).
• Connecting 3-way speakers with 2-way crossover
network mode selected may damage the speakers.
1
Display the source/option selection screen.
On the Home screen, touch as follows:
2 Put the unit in standby.
On the source/option selection screen, touch as
follows:
3 Press MENU button and volume knob on
the monitor panel at the same time to
display the <X’over Network> screen.
4 Select the crossover network mode.
[2way] Select this when connecting speakers
in a 2-way system (front/rear).
[3way] Select this when connecting speakers
in a 3-way system (tweeter/mid
range/woofer).
A confirmation message appears. Touch [Yes] to
confirm.
<Sound Effect>
Adjust the sound effect.
<Loudness>
Adjusts loudness.
OFF (Initial)/Low/High
<Bass Boost>
Selects the bass boost level.
OFF (Initial)
/Level 1/Level 2/Level 3/Level 4/Level5
<Drive Equalizer>
Reduces the driving noise by raising the bandwidth.
OFF (Initial)/ON
<Space Enhancer>*1
Virtually enhances the sound space using the Digital
Signal Processor (DSP) system. Select the enhance
level.
OFF (Initial)/Small/Medium/Large
<Supreme>*2
Restores the sound lost due to audio compression to a
realistic sound.
OFF/ON (Initial)
<Realizer>
Virtually makes the sound more realistic using the
Digital Signal Processor (DSP) system. Select the sound
level.
OFF (Initial)/Level 1/Level 2/Level 3
31
ENGLISH
00_DDX4019BT_ENQN_ENG.indb 3100_DDX4019BT_ENQN_ENG.indb 31 29/6/2018 1:49:15 PM29/6/2018 1:49:15 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DDX4019DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DDX4019DAB in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DDX4019DAB

Kenwood DDX4019DAB User Manual - German - 60 pages

Kenwood DDX4019DAB User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info