699517
12
Zoom out
Zoom in
Previous page
1/18
Next page
Further DAB+ information
With DAB+, additional information is also transmitted in addition to music signals. This can be
brought up as follows.
Press the
<INFO> button to successively call up the following information:
Signal level: This is shown by symbols appearing in the display from left to right.
The more symbols are shown, the better the reception.
PTY (Programme Type): This indicates the division of the stations into categories, e.g. pop, news,
religion,info.classics,etc.Nameoftheensemble,e.g.“DR Deutschland”
• Displaying the channel and frequency of the set station
ERR XX: This information shows the error rate of the digital reception. This is also dependent on the
signal level and is also used for adjusting the aerial.
XX K BPS:Thisdisplaysthestation’sdatarate,e.g.80kBit/s.Thedataratecandifferfromstation
to station.
DAB+: Denotes the ‘DAB+’ reception type
• Current time
• Current date
DAB+ menu functions
The <MENU>
button opens a menu in which different functions for DAB+ can be set. The menu can be
scrolled through using the <TUNE+-> buttons. The following functions can be set:
Full scan:Renewedautomaticstationscan.Conrmthefunctionbyusingthe<VOL> button.
Manual tune: Use this to set a particular reception channel manually.
•Thefunctionisconrmedusingthe“VOL“ button and the currently set channel is shown in the display with its
associated frequency.
• Press the <Tune+-> buttons to manually select another channel.
•Conrmtheselectionusingthe“VOL” button. The signal level will then appear in the display. Press
the button again to load the current ensemble.
DRC (Dynamic Range Control): Provided this is support by the set station,
an adjustment can be made to the dynamic range. Possible settings are “Off”, “Low” and “High”.
Selection is made using the <Tune+->buttonsandtheselectionisconrmedusingthe<Vol> button.
Prune: This function deletes invalid stations from the station list. Select using the
<VOL>button,select“Yes / No” using the <TUNE+->buttonsandconrmwith<VOL>.
• SYSTEM: Settings for sleep timer, alarm, time, language and factory settings
Using the FM radio
Press the <SOURCE> button until “FM”appears in the display.
Setting a FM station
• Press the <TUNE +> button to increase the reception frequency.
• Press the <TUNE -> button to decrease the reception frequency.
• If you hold down the
<TUNE +> or <
TUNE -> buttons, an automatic station scan starts
which will stop at the next detected station.
• If you press and hold the <AUTO/ENTER> button for a few seconds, the automatic Station search
starts. All found stations are stored.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CR-M10DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CR-M10DAB in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood CR-M10DAB

Kenwood CR-M10DAB User Manual - German - 18 pages

Kenwood CR-M10DAB User Manual - Dutch - 18 pages

Kenwood CR-M10DAB User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info