Manual Kenwood CMOS-320 (page 10 of 15) (English)

565393

Zoom out

Zoom in

1/15

CMOS-320/CMOS-220

Camera Setting Procedure

1 Complete all of the required connections in

advance.

2 Display the camera video.

For displaying the camera video, read the instruction manual

for your video monitor.

3 Press and hold the view and + buttons of the

switch unit simultaneously to enter the camera

adjustment mode.

4 First select the positioning of the camera.

Use the + or – button to select an item and press the view

button to enter the selection.

•Whenusingthecameraastherearviewcamera,select

[OK].Andthengotostep6.

•Whenusingthecameraasthefrontcamera,select

[Normal]andthenselect[OK].Andthengotostep5.

•Selecting[ResetAll]resetsallofthecamerasettings

tothedefaults.

5 Adjust the camera’s mounting position with

the + or – buttons on the switch unit.

Select [Standard] when installing the camera at a height of

50cm to 80cm (1.64feet to 2.62feet).

Select [Lower] when installing the camera at a height of

30cm to below 50cm (0.98feet to below 1.64feet).

6 Select a camera adjustment item and adjust it.

The following items are available for camera adjustment.

1. Overhead view image adjustments

(Centering, Right-and-Left angle, Up-and-Down Angle)

2. Wide view guideline adjustments

(Size, Horizontal direction, Red Line Position Setting)

To select an item:

Press the + or – button to select an item and press the view

button to enter the selection. When an adjustment item is

selected, the frame of its icon turns from blue to yellow.

To adjust the item:

After selecting the item, press the + or – button to adjust it

and press the view button to enter the adjusted value.

7 End the setting.

Overhead View Image Adjustment

(Centering)

Thisitemadjuststhecenterofthecamerainstallation

position.

1 Select “OVERHEAD VIEW IMAGE ADJUSTMENT

(CENTERING)”.

2 Press the + or – button of the switch unit so

that the two white lines appear on the position

corresponding to the center line of the vehicle.

Adjustment is possible by two steps to the left and right.

If the adjustment is not possible in the currently available

range, change the camera position before retry.

•Select[Back]togobacktothepreviousadjustment

item.

•Select[Next]toadvancetothenextadjustmentitem.

•Selecting[Reset]inanindividualadjustmentitem

resetsthecamerasettingofthatitemtothedefault.

Camera Setting (CMOS-320 only)

LVT2720-001A.indb 10 14/02/14 15:10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CMOS-320 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood CMOS-320

Kenwood CMOS-320 User Manual - English, German - 60 pages

Kenwood CMOS-320 User Manual - German - 15 pages

Kenwood CMOS-320 User Manual - Dutch - 60 pages

Kenwood CMOS-320 User Manual - Dutch - 15 pages

Kenwood CMOS-320 User Manual - French - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood CMOS-320 Manual

Product: