536420

Kenwood CMOS 210 Manual

8
Zoom out
Zoom in
Previous page
1/116
Next page
8
|
CMOS-310/CMOS-210
Switch Unit Operation
The switch unit can be used to switch the image display
mode, view/hide the guideline display and adjust the
camera.
View button
• Switches the image display mode.
• Select an item in the setting mode.
• Press and hold to display or hide the guidelines.
+/− button
Moves across the setting mode
items or sets an adjustment value.
Preparation Before Camera Setting
1 Stop the vehicle.
In a parking space with white lines and tire stoppers, park the
vehicle in the center of the white line frame.
2 Advance the vehicle.
• Move the vehicle forward until the entire parking space can
be viewed in the camera image.
• Be sure to apply the parking brake and push the brake
pedal so that the vehicle is completely stationary. Perform
the setting in a place that will not cause nuisance to other
people.
Camera Setting Procedure
1 Complete all of the required connections in
advance.
2 Display the camera video.
Some video monitors may switch automatically to the
external video input function. For details, read the instruction
manual for your video monitor.
3 Press and hold the view and + buttons of the
switch unit simultaneously to enter the camera
adjustment mode.
4 First select the positioning of the camera.
Use the + or – button to select an item and press the view
button to enter the selection.
• When using the camera as the rearview camera, select
[OK].
• When using the camera as the front camera, select
[Switch to Normal Image Display] and then select [OK].
• Selecting [Reset All] resets all of the camera settings
to the defaults.
5 Select a camera adjustment item and adjust it.
The following items are available for camera adjustment.
1. Overhead view image adjustments
(Centering, Right-and-Left angle, Up-and-Down Angle)
2. Wide view guideline adjustments
(Size, Horizontal direction, Vertical direction, Red Line
Position Setting)
To select an item:
Press the + or – button to select an item and press the view
button to enter the selection. When an adjustment item is
selected, the frame of its icon turns from blue to red.
To adjust the item:
After selecting the item, press the + or – button to adjust it
and press the view button to enter the adjusted value.
6 End the setting.
Camera Setting (CMOS-310 only)
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CMOS 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CMOS 210 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info