to make coffee
1 Lift the lid using the handle ባ at
the front of the coffee maker.
2 Fill the tank with the desired amount
of water. The water level must be
between the 2 and 6 cup marks.
Do not fill above the MAX level.
●
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3Ensure the filter holder is positioned
correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate. NOTE: The lid
must be fitted to the carafe
in order to operate the anti-
drip valve.
6 Plug in and switch on.
7 Don’t remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
● The hot plate will keep your coffee
hot, but the sooner you drink it, the
better it will taste.
● If you have not used the appliance
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
●
Always switch off, unplug and allow
to cool before cleaning.
●
Don’t wash parts in the dishwasher.
carafe and lid, filter holder
and permanent filter holder
●
Wash, then dry.
body
●
Wipe with a damp cloth, then dry.
Don’t use abrasives - they’ll scratch
the plastic and metal surfaces.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean it
out.
4Wash the parts.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your appliance or
●
servicing or repairs
Contact the shop where you bought
your appliance.
4
