Packet mixes eco button
Bake only Program 10
The bake only program can be selected on its own and used in the following ways:-
1 Use in conjunction with the dough cycle or to lengthen the baking time after completion of one
of the other bread programs.
●●
Wait until the dough cycle or bread program has completed - the bread maker will beep and
0:00 on the display.
●●
Press the menu button and select program 10.
●●
Use the Timer buttons and to select the required baking time from 10 minutes to 90
minutes.
●●
Press the START/STOP button
bq
.
2 Use to rewarm or crisp loaves already baked and cooled.
●●
Select program 10 from the MENU.
●●
Use the Timer buttons and to select the required baking time from 10 minutes to 90
minutes.
●●
Press the START/STOP button
bq
.
The bread maker should not be left unattended when using the Bake only
program. Manually stop the program when the desired crust colour has been
achieved.
The eco bake setting can be used and is recommended for most ready prepared bread mixes.
(Wholemeal and Granary bread mixes generally work best on Program 3 Wholewheat).
●
Check that the total weight of the mix does not exceed the maximum amount your bread
maker can handle.
●
Add the amount of water recommended by the manufacturer to the bread pan first, then add
the bread mix.
●
For best results use lukewarm water (30-35°C) and measure the water temperature with either
a thermometer or mix 25% boiling water with 75% of cold water.
●
If the loaf does not rise sufficiently try adding 1-2tsp of easy blend dried yeast next time.
●
The timer delay is not recommended for packet mixes as you cannot separate the yeast from
the liquid.
Visit the Kenwood website for more information about using bread mixes in your bread maker.
18
