379995
8
Zoom out
Zoom in
Previous page
1/88
Next page
how to measure ingredients (refer to
illustrations 3 to 7)
It is extremely important to use the exact measure of
ingredients for best results.
Always measure liquid ingredients in the see-through
measuring cup with graduated markings provided.
Liquid should just reach marking on cup at eye level,
not above or below (see 3).
Always use liquids at room temperature, 20ºC/68ºF,
unless making bread using the basic cycle. Follow the
instructions given in the recipe section.
Always use the measuring spoon provided to measure
smaller quantities of dry and liquid ingredients. For 1
tsp or 1 tbsp, fill to the top and level off the spoon (see 6).
For
1
2 measure fill up to the line.
on/off switch
Your BM150 is fitted with an ON/OFF switch and will
not operate until the “on” switch is pressed.
The ON/OFF switch is situated underneath the unit on
the right hand side.
Plug in and press the ON/OFF switch and the power
on light will come on.
Always switch off and unplug your breadmaker after
use.
using your Bread Maker
(refer to illustration panel)
1 Lift out the bread pan by the handle.
2 Fit the kneader.
3 Pour the water into the bread pan.
4 Add the rest of the ingredients to the pan in the order
listed in the recipes.
Ensure that all the ingredients are weighed accurately
7 as incorrect measures will produce poor results.
8 Insert the bread pan and push down to ensure the
pan is locked in position.
9 Close the lid.
10 Plug in and switch on - the power on light will come
on.
11 Press the required program button (basic, French or
wholewheat) the unit will beep and the corresponding
indicator light will light up.
If you wish to change or stop the program cycle
selected, press the corresponding program button
until it beeps.
12 At the end of the baking cycle switch off and unplug
the breadmaker.
13 Lift out the bread pan by the handle. Always use
oven gloves as the pan handle will be hot.
14 Then turn out onto a wire rack to cool.
15 Leave the bread to cool for at least 30 minutes before
slicing, to allow the steam to escape. The bread will
be difficult to slice if hot.
16 Clean the bread pan and kneader immediately after
use (see care and cleaning).
3
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood bm150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood bm150 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info