530739
5
Zoom out
Zoom in
Previous page
1/65
Next page
to use your blender
1 Fit the sealing ring into the blade unit -
ensuring the seal is located correctly.
L
eaking will occur if the seal is damaged
or incorrectly fitted.
2 Clip the blade unit into the base .
3
Screw the goblet onto the blade assembly in a
clockwise direction - ensuring that the blade
assembly is fully tightened.
4 Put your ingredients into the goblet.
5 Clip the lid seal onto the underside of the lid.
6 Fit the filler cap to the lid.
7 Fit the lid by pushing down until secure.
8 Place the blender onto the power unit.
The appliance won’t work if the blender is
incorrectly fitted.
9 Plug in and the “ready to use” light will come on
to indicate that the blender is interlocked correctly
and ready to use. If the “ready to use” light is off
the blender is either not fitted or not interlocked
correctly to the power unit.
10Select a speed (refer to the function selector chart).
hints
To blend dry ingredients - cut into pieces, remove
the filler cap, then with the machine running, drop
the pieces down one by one. Keep your hand over
the opening. For best results empty regularly.
The processing of spices is not recommended as
they may damage the plastic parts.
When making mayonnaise, put all the ingredients,
except the oil, into the blender. Remove the filler
cap. Then, with the appliance running, add the oil
slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to process,
add more liquid.
care and cleaning
Always switch off, unplug and dismantle before
cleaning.
E
mpty the goblet before unscrewing it from the
blade unit.
The goblet can be washed in your dishwasher.
power unit
Wipe with a damp cloth, then dry.
Don’t immerse the power unit in water.
Wrap excess cord around the bottom of the power
unit .
blade assembly
1 Unscrew the base from the goblet in an
anticlockwise direction.
2 Remove the blade unit from out of the base by
pushing up from underneath.
Care should be taken when removing the
blade unit from the base.
3 Remove and wash the sealing ring.
4 Don’t touch the sharp blades – brush them clean
using hot soapy water, then rinse thoroughly under
the tap. Don’t immerse the blade unit in
water.
5 Leave to dry upside down.
lid
Remove the lid by pushing the tab up .
Unclip the seal before cleaning the lid .
Wash both parts by hand, then dry.
other parts
Wash by hand, then dry.
3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood BLX69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood BLX69 in the language / languages: All languages as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info