465311
23
Zoom out
Zoom in
Previous page
1/64
Next page
23
English
You can adjust the tone (bass and treble) as desired.
Settings with* are the default.
• Press the CURSOR LEFT/RIGHT buttons to set the tone mode as desired.
OFF : To listen to a program source without the tone effect.
ON : To adjust the tone for your taste.
When the TONE CONTROL is set to ON to adjust the tone (bass and treble)
1
. Press the OK button to enter the tone adjustment mode.
Then “TRE ~” will be displayed.
2
. Press the CURSOR UP/DOWN buttons to select the desired tone mode.
3
. Press the CURSOR LEFT/RIGHT buttons to adjust the selected tone as desired.
The tone level can be adjusted within the range of -10 ~ +10 dB.
In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).
Extreme settings at high volume may damage your speakers.
To complete tone adjustment, repeat the above steps
2
and
3
.
When selecting the SPEAKER DISTANCE
1.
Press the CURSOR UP/DOWN buttons to select the “DISTANCE”, then press the OK button.
Then “L ~” will be displayed.
2.
Press the CURSOR UP/DOWN buttons to select the desired speaker.
Note :
You cannot select the speakers set to “NO”.
3.
Press the CURSOR LEFT/RIGHT buttons to set the selected speakers as desired.
You cannot set the distance within the range of 0.1 ~ 9.0 meters in 0.1 meter intervals.
4.
Repeat the above steps 2 and 3 until the distances are all set as desired.
About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center,
surround, surround back and subwoofer speakers should be the same distance from the main listening position as the
front speakers. By entering the distance between the listening position and each speaker, the delay times of center,
surround, surround back and subwoofer speakers are automatically adjusted to create an ideal listening environment
virtually as if the center, surround, surround back and subwoofer speakers were at their ideal locations respectively.
Setting the Tone
TONE ON* / OFF
TRE 0* / -10 ~ +10
BASS 0* / -10 ~ +10
BDR-A7_EN_CS3.indb 23BDR-A7_EN_CS3.indb 23 11.3.10 6:59:36 PM11.3.10 6:59:36 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood BDR-A7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood BDR-A7 in the language / languages: English as an attachment in your email.

The manual is 9,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood BDR-A7

Kenwood BDR-A7 User Manual - German - 58 pages

Kenwood BDR-A7 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info