465311
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
English
4.
CONNECTING DIGITAL INs
• The OPTICAL and the COAXIAL DIGITAL OUTs of
the components that are connected to this unit can be
connected to these DIGITAL INs.
• A digital input should be connected to the components
such as a CD player, DVD player, etc. capable of
outputting DTS Digital Surround, Dolby Digital or PCM
format digital signals, etc.
• When making the COAXIAL DIGITAL connection, be
sure to use a 75 Ω COAXIAL cord, not a conventional
AUDIO cord.
Notes :
• Be sure to make either a OPTICAL or a COAXIAL DIGITAL connection on each component. (You don’t need to do both.)
• If you connect the DIGITAL INs to your components, you should assign the DIGITAL INs correctly. (For details, refer to
“When SAT, TV, AUX is selected as an input source” on page 14.)
5.
CONNECTING SPEAKERS
Be sure to connect speakers firmly and
correctly according to the channel (left
and right) and the polarity (+ and -). If the
connections are faulty, no sound will be
heard from the speakers, and if the polarity
of the speaker connection is incorrect, the
sound will be unnatural and lack bass.
For installing the speakers, refer to “Speaker
placement” on page 8.
After installing the speakers, first adjust
the speaker settings according to your
environment and speaker layout. (For details,
refer to “Setting the speaker setup” on page
20.)
Depending on whether the type of your
subwoofer is the passive subwoofer or active
(powered) subwoofer, connect it as follows :
* Connect the SUBWOOFER terminals to the
passive subwoofer.
* Connect the SUBWOOFER PREOUT jack
to the active subwoofer. (For details, refer to
“CONNECTING PREOUTs” below.)
Caution :
Be sure to use the speakers with the
impedance of 6 ohms or above.
Do not let the bare speaker wires touch each
other or any metal part of this unit. This could
damage this unit and/or the speakers.
Never touch the speaker terminals while the AC input cord is connected to the wall AC outlet. Doing so could result in
electric shocks.
Connecting speaker wire
1. Strip away approx. 10
mm (3/8 inch) of wire
insulation, then twist the
wire ends tight.
2. Loosen by turning
the speaker terminal
counter-clockwise.
3. Insert the bare part of
the wire.
4. Tighten by turning it
clockwise.
Passive subwoofer
Component with
COAXIAL DIGITAL OUT
Component with
OPTICAL DIGITAL OUT
Front
right
Front
left
Center
Surround
right
Surround
left
Passive subwoofer
BDR-A7_EN_CS3.indb 7BDR-A7_EN_CS3.indb 7 11.3.10 6:59:34 PM11.3.10 6:59:34 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood BDR-A7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood BDR-A7 in the language / languages: English as an attachment in your email.

The manual is 9,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood BDR-A7

Kenwood BDR-A7 User Manual - German - 58 pages

Kenwood BDR-A7 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info