565254
38
Zoom out
Zoom in
Previous page
1/44
Next page
If you are having a problem with your System,
check this list for a possible solution before calling
for service.
If the following measures do not resolve the
problems:
The System works using a built-in microprocessor.
If buttons are not operative, disconnect the AC
power cord from the wall outlet, wait for a while,
then connect the cord again.
General
Power does not come on.
B
Connect the AC adapter correctly.
The System turns off automatically.
B
Auto power save function is functioning. (page 15)
The buttons do not function.
B
Reset the System. (page 40)
Adjustments or settings are suddenly
canceled before you finish.
B
There is a time limit. Repeat the procedure.
Unable to operate the System from the remote
control.
B
The path between the remote control and the
remote sensor on the System is blocked.
B
Batteries of the remote control are exhausted.
Change the batteries.
No sound is heard.
B
Adjust the volume.
B
Cancel muting.
B
Disconnect the headphones.
“--:--” flashes on the display.
B
Set the clock again. (page 14)
No audio output from the digital input terminal
(DIGITAL IN).
B
Connect the devices correctly.
B
Check to ensure that the digital audio output
setting of the connected device is set to “PCM”.
iPod operations
iPod does not play.
B
Connect the USB cable correctly.
B
Check the compatibility of your iPod. (page 35)
B
Battery of iPod are exhausted. Charge the
battery of iPod.
B
Reset your iPod after disconnecting it from the
System, unplug the power cord of the System,
and plug it in again. (For details on resetting
your iPod, please visit Apple’s official website.)
USB device/CD
Unable to eject a disc.
B
Press [M] until “EJECT” is displayed.
B
If CD-R/CD-RW that is printable on the label
side is used, the disc may not be ejected from
the System due to the label side is sticked to
the System.
The disc/USB device does not play.
B
Connect the USB devices correctly.
B
Turn on the power of the USB audio player.
B
Try using a different USB flash memory device.
B
Insert the disc with the label side facing you.
B
The disc or lens is scratched or dirty. Clean the
disc or lens.
B
Playback is not possible if an audio file is
corrupted.
B
Check whether the audio file format is
supported by the System.
B
The disc is recorded using “packet writing
(UDF file unit)” and cannot be played back.
38
Troubleshooting
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood AP-300-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood AP-300-B in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood AP-300-B

Kenwood AP-300-B User Manual - German - 44 pages

Kenwood AP-300-B User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info