508916

Kenmore 790.4111 Manual

10
Zoom out
Zoom in
Previous page
1/76
Next page

Before Setting Surface Controls
Fig. 1
Fig. 5
Fig. 8
Fig. 9
Fig. 10
Fig. 6 Fig. 7
Fig. 2 Fig. 3 Fig. 4
Cooktop Display Windows
The cooktop controls provide a digital display for each of
the radiant surface elements located on the cooktop. Power
levels and messages are easily monitored and adjusted
using the corresponding control keypads in combination with
the window displays.

The cooktop control will display heat levels ranging from Hi
(Figure 1) to Lo (Figure 6) and  (Figure 7). The settings
between (Figure 2) and  (Figure 3) decrease or
increase in increments of .5 (1/2). The settings between
 (Figure 4) and  (Figure 5) are Simmer settings which
decrease or increase in increments of .2 (1/5) to Lo (Figure
6; lowest Simmer setting) for more precise settings at lower
heat levels.

After using any of the radiant element positions the cooktop
will become very hot. Even after setting the controls to OFF,
the cooktop will remain hot for some time. The cooktop
control monitors the temperature of the cooktop and
displays the message “HE” (hot element) warning when the
cooktop is still too hot to touch (Figure 8). If the HE message
appears in the window, the control can still be turned on
again for use.

The  message (Figure 9) will be displayed whenever there
has been a power interruption to the appliance. The 
message will disappear by itself after a few seconds.

The cooktop display windows will show the Sb message
whenever the Sabbath feature is active (Figure 10). When
activated, the Sabbath feature works for both the oven
and cooktop together. Once the Sabbath feature is active,
changes to the heat levels for the cooktop heating elements
will not show in the displays. The cooktop will react slower
to heat level changes. See Sabbath feature section for
complete instructions.
Fig. 12
Fig. 11

Use the Cooktop Lockout to lock all surface elements from
being accidentally turned ON (including Warmer Zone). This
feature will only lockout the cooktop features.
To turn the Cooktop Lockout feature ON:
1. Be sure all surface element controls are OFF.
2. Press and hold Cooktop Lockout keypad until acceptance
tone sounds (about 3 seconds).
When the cooktop is locked, the cooktop locked indicator
icon will appear in the oven control display window (Fig. 11).
The () message will appear in the cooktop display windows
whenever the Cooktop Lockout feature is active (See Fig. 12).
If a triple beep sounds (entry error tone) instead, check
and be sure all surface elements are turned OFF before
activating the Cooktop Lockout feature.

Press and hold Cooktop Lockout keypad until acceptance
tone sounds (about 3 seconds). The cooktop locked indicator
light will turn OFF and the cooktop may be used for normal
cooking operations.

• If Cooktop Lockout is active and a power failure occurs,
when power is restored the cooktop will remember the
setting and remain locked.
• Starting a Flex Clean cycle will automatically turn ON the
Cooktop Lockout feature. The cooktop will remain locked
until the Flex Clean cycle is nished and the oven door
has unlocked.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenmore 790.4111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenmore 790.4111 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenmore 790.4111

Kenmore 790.4111 User Manual - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info