686371

Kemppi Robot Gun Mount T1 Manual

8
Zoom out
Zoom in
Previous page
1/22
Next page
8
Robot Gun Mount T1© Kemppi Oy 2017 1712
OPERATING MANUAL
6.6 Product-specific gun data
The following table applies to the entire Kemppi gun system, including gun neck, gun
mount and cable assembly. The table below presents product-specic gun data in line
with EN 60 974-7.
Type Type of cooling Load (A) ED (%) Wire Ø (mm) Gas ow (l/min)
CO₂ M21
500-g gas 340 320 100 0.8–1.6 10–30
500-w liquid 340 340 100 0.8–1.6 approx. 20
The cable assembly length is determined on the basis of the robot brand and model.
The load data have been determined under standard conditions, at low to medium
reected heat, with free air circulation and an ambient temperature of about 28 °C.
In use under more rigorous conditions, the load values must be reduced by 10–20%.
Applications with the load 340 A at 100 % duty cycle require an engineered solution.
6.7 Abbreviations
DC
Direct current
ED
Duty cycle
MIG
Metal inert gas
MAG
Metal active gas
MAC value
Maximum allowable concentration of harmful substances in the
workplace
Voltage rating
Insulation resistance, electric strength, and protection class
TCP
Tool center point
6.8 The type plate
Robot Gun Mount T1 is identied by a sticker or a Kemppi logo. When contacting the
service sta, please remember to check the production stamp near the Kemppi logo.
For pulse-arc use, the load values are reduced by up to 35%.
Figure 3: T1 type plate
1
4
3
2
1. Type of device
2. Flange serial number
3. Consecutive number
4. Production date
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Robot Gun Mount T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Robot Gun Mount T1 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info