771274

Kemppi MTP 350 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
The gun is equipped with spiral liner for welding normal steel wire.
Before connecting the gun, make sure that its wire liner is according to
recommendations for the welding wire in question.
Set the snap connector carefully at its place so that the control connectors
will not get damaged. Tighten the snap connector carefully in order to
avoid voltage losses. Loose connection will heat the gun and the feeder
unit. Control tightness of connection daily.
equipment on welding place. Be prepared for hazards in special
welding jobs, eg. for the danger of fire or explosion when welding
container type work pieces. Note! Fire can break out from sparks even
several hours after the welding work has been nished!
Mains voltage
Never take welding machine inside a work piece (eg. container or truck).
Do not place welding machine on a wet surface. Always check cables
before operating the machine. Change defect cables without delay.
Defect cables may cause an injury or set out a fire. Connection cable
must not be compressed, it must not touch sharp edges or hot work
pieces.
Welding power circuit
Isolate yourself by using proper protective clothing, do not wear wet
clothing. Never work on a wet surface or use defect cables. Do not put
MIG gun or welding cables on welding machine or on other electric
equipment. Do not press MIG gun switch, if the gun is not directed
towards a work piece.
Welding fumes
Take care that there is sucient ventilation during welding. Take special
safety precautions when welding metals which contain lead, cadmium,
zinc, mercury or beryllium.
EN
2. CONNECTING THE GUN
4
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi MTP 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi MTP 350 in the language / languages: English as an attachment in your email.

The manual is 1.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info