686330
20
Zoom out
Zoom in
Previous page
1/28
Next page
NL
3.5 SETUPFUNCTIE
SETUP-functie Display
*S = Standaard: voor alle memory kanalen
De fabrieksinstelling is met een grijze achtergrond
Upslope (*S)
A1 ON De upslope is gekoppeld aan de stroomsterkte.
OFF De upslope is onafhankelijk regelbaar.
Downslope(*S)
A2 ON De downslope is gekoppeld aan de stroomsterkte.
OFF De downslope is onafhankelijk regelbaar.
TIG Antifreeze (*S)
A3 ON TIG Antifreeze is aan.
OFF TIG Antifreeze uit.
MMA Antifreeze (*S)
A4 ON MMA Antifreeze is aan.
OFF MMA Antifreeze is uit.
VRD (*C)
A7 ON VRD mode: open spanning < 35 V
OFF Standaard open spanning (3000: 63 V, 3003: 58 V)
2T downslope onderbreken
A8 ON Bij 2T kan de downslope snel worden onderbroken met een korte
puls op de toorts schakelaar
OFF Onderbreken is uitgeschakeld
Downslope vertraging
A9 ON De downslope is na min. 3 seconden lassen actief
OFF De downslope is altijd actief
Upslope begrenzing
A10 ON Bij een stroomsterkte boven de 100 A en een upslope van 0.0 sec., is
er altijd een automatische upslope van 0.2-sec. vanaf de helft van de
ingestelde stroomsterkte
OFF Direct de ingestelde lasstroom
MMA/TIG selectie
afstandsbediening (*S)
A12 ON TIG = begin van de schaalverdeling
MMA = eind van de schaalverdeling
OFF Regelen van de stroomsterkte
Startboog
A13 ON Startboog aan.
OFF Stopboog uit
Stroom instelling tijdens de
downslope
A14 ON Met de toorts schakelaar kan de lasstroom worden geregeld tijdens
de slope (4T en Minilog)
OFF Functie uitgeschakeld.
Memory channel selectie
met de Plus/Min toetsen
(*S)
A15 ON Met de plus/min toetsen de programma’s selecteren RTC20
OFF Met de plus/min toetsen de stroomsterkte regelen
Activeren van de plus/min
toetsen (*S)
A16 ON De plus/min toetsen zijn altijd actief (RTC20)
OFF Inschakelen via de selectie afstandsbediening
Waterkoeler
flowbeveiliging (*S)
A17 ON Flowbeveiliging aan
OFF Flowbeveiliging uit
Inschakelen van de
waterkoeler (S*)
A19 ON Automatisch
OFF Constant
Thermische beveiliging
waterkoeler (*S)
A20 ON Ingeschakeld
OFF Uitgeschakeld
Automatische herkenning
van de afstandsbediening
(*S)
A21 ON Automatische herkenning aan, afstandsbediening kan niet worden
geselecteerd als deze niet is aangesloten.
OFF Automatische herkenning aan/uit. Afstandsbediening kan worden
geselecteerd zelfs als deze niet is aangesloten.
Eindboog
A22 ON* Eindboog actief bij * 4T LOG
OFF** Eindboog uitgeschakeld ** MINILOG
18
MasterTig MLS 3000, 3003 ACDC / © Kemppi Oy / 1112
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi MasterTig MLS 3003 ACDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi MasterTig MLS 3003 ACDC in the language / languages: Dutch as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info