686320
31
Zoom out
Zoom in
Previous page
1/75
Next page
MasterTig 235ACDC, 325DC, 335ACDC
Gebruiksaanwijzing - NL
Instelbare parameters bij continulassen:
Voorgas: Min/Max = 0,0 s ... 9,9 s, Auto, 0,1 s stap (Standaard = Auto)
>> Deze waarde kan niet worden aangepast als Lift TIG-boogontsteking is ingeschakeld.
Upslope: Min/Max = 0,0 s ... 5,0 s, 0,1 s stap (Standaard = 0,0 s)
Hotstartniveau: Min/Max = -80% ... +100%, 1% stap (Standaard = Uit), Waarde '0' = Hotstart uit
Hotstarttijd: Min/Max = 0,1 s ... 9,9 s, 0,1 s stap (Standaard = 1,2 s)
>> Deze waarde kan niet worden aangepast als hot start is uitgeschakeld.
>> De hotstarttijd kan niet worden aangepast als de schakelaarlogica 4T is geselecteerd.
Minilog: Min/Max = -99% ... +125%, 1% stap (Standaard = Uit), Waarde '0' = Minilog uit
>> Deze waarde kan niet worden aangepast als schakelaarlogica 2T is geselecteerd.
Downslope: Min/Max = 0,0 s ... 15,0 s, 0,1 s stap (Standaard = 0,1 s)
Nagas: Min/Max = 0,0 s ... 30,0 s, Auto, 0,1 s stap (Standaard = Auto)
Instelbare parameters bij lassen met tijdsinstelling:
Voorgas: Min/Max = 0,0 s ... 9,9 s, Auto, 0,1 s stap (Standaard = Auto)
>> Deze waarde kan niet worden aangepast als Lift TIG-boogontsteking is ingeschakeld.
Upslope: Min/Max = 0,0 s ... 5,0 s, 0,1 s stap (Standaard = 0,0 s)
Downslope: Min/Max = 0,0 s ... 15,0 s, 0,1 s stap (Standaard = 0,1 s)
Nagas: Min/Max = 0,0 s ... 30,0 s, Auto, 0,1 s stap (Standaard = Auto)
Instelbare parameters bij MicroTack-lassen:
Voorgas: Min/Max = 0,0 s ... 9,9 s, Auto, 0,1 s stap (Standaard = Auto)
>> Deze waarde kan niet worden aangepast als Lift TIG-boogontsteking is ingeschakeld.
Nagas: Min/Max = 0,0 s ... 30,0 s, Auto, 0,1 s stap (Standaard = Auto)
Instelbare parameters bij AC-modus:
Balans: -60 % ... 0% (Standaard = -25%)
AC-frequentie: 30 Hz ... 250 Hz (Standaard = 60 Hz)
Instelbare parameters bij pulsmodus:
Pulsstroom: 2 A Stroombron max A, 1 A stap *
Puls-verhouding: 10% 70 %, 1 % stap (Standaard = 40 %) *
Basisstroom: 10% 70 %, 1 % stap (Standaard = 20 %), ampères zichtbaar *
Pulsfrequentie (DC): 0,2 Hz ... 300 Hz, 1 Hz stap (0,2 Hz ... 10 Hz, stap is 0,1 Hz) (Standaard = 1 Hz) *
Pulsfrequentie (AC): 0,2 Hz ... 20 Hz, 1 Hz stap (0,2 Hz ... 10 Hz, stap is 0,1 Hz) (Standaard = 1 Hz) *
* De modus Automatische puls heeft andere parameterwaarden, die niet kunnen worden aangepast.
© Kemppi
31/75 1920900 / 1921
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi MasterTig Cooler M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi MasterTig Cooler M in the language / languages: Dutch as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info