686312
19
Zoom out
Zoom in
Previous page
1/26
Next page
NL
3.3.12 SETUP
Met de functie SETUP kunt u lasparameters wijzigen die geen eigen paneelfuncties hebben. Deze
parameters kunnen afzonderlijk worden ingesteld voor 1-MIG en Puls-MIG. SETUP-instellingen
worden voor elk geheugenkanaal afzonderlijk ingesteld.
Setup-functies op puls-paneel
Naam parameter Nr Display 1-MIG Puls-
MIG
Fabriek-
waarde
Unit Toelichting
PostGasTime
1 PoG X X Curve s PostGas-tijd 0.0 – 9.9 s
PreGasTime
2 PrG X X Curve s PreGas-tijd, functies met 2T 0.0 – 9.9 s
HotStartLevel
11 Hot X X 30 % Ratio Hot Start – lasvermogen
-50 ... +75%
HotStartTime 2T
12 H2t X X 1,2 s 2T Hot Start-timer 0.1 – 9.9 s
CraterFillLevel
14 CFL X X 30 % Eindniveau lassen 10 – 90 %
CraterFillSlope
15 CFS X X 1 s/10m Afname draadsnelheid 1 – 20 s/10m
CreepStartLevel
17 CSL X X Syn Beginwaarde draadsnelheid
10 – 90
CreepStartSlope
18 CSS X X 0 s/10m Versneltijd draad 0 – 50 s/10m
DoubleFrequency
21 dFr X Curve Hz Freuquentiecontrole dubbel puls
0.4 – 8.0 Hz
DoubleAmpiltude
22 dA X Curve m/min Variatiecontrole dubbel-pulsstroom
0.1 – 3.0 m/min
StartPower
31 StP X X 0 Bediening beginvermogen
-9 ... 0 ... +9
PulseCurrent
33 PuC X 0 % Bediening max. stroom puls
-10 ... +15%
ArcLength
AdjRange
41 ALr X X 0 % Instelbereik booglengte -50 ... +75%
Calibration
42 CAL X X 1 V/100A Fijnafstelling middenwaarde
booglengte 0.0 – 10.0 V/100A
WFS
51 FS 18 m/min Maximale draadaanvoer
18 of 25 m/min
Gun
53 Gun Aan Vloeistofgekoelde thermische
beveiliging aan/uit
GunRemote
54 GrE Aan Automatische identicatie
afstandsbediening pistool uitschakelen
Waterkoeler
AAN/UIT selectie
55 Coo On Selecteer OFF bij de combinatie
aangesloten koeler en gasgekoeld
pistool na inschakelen machine
Weergave
resettijd
81 dLY X X 5 s 1 – 20 s
PRG INFO
veldselectie
82 diS X X 1 1, 2, 3
Restore
99 Uit Fabrieksinstellingen herstellen
OFF=niet herstellen,
Pan=paneel en setup,
ALL= ook geheugenkanalen
De parameters wijzigen
Als u de selectieschakelaar 2T/4T (SETUP) iets langer indrukt, gaat de machine over naar de modus
SETUP. Op de display worden het nummer van de ingestelde parameter (knippert), de afkorting en
waarde weergegeven. Selecteer het parameternummer met de knoppen “SYNERGIC PRG” + en – of
de knop “SETUP (stappen van tien). Wijzig de waarde met de bedieningsknop (in enkele gevallen
kunt u de waarde vinden met behulp van de synergy curve). “Syn en de curvewaarde knipperen
17
© Kemppi Oy / 1736
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi KempactCool 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi KempactCool 10 in the language / languages: Dutch as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info