686286
10
Zoom out
Zoom in
Previous page
1/16
Next page
FastMig M 320, 420, 520
8
NL
2.4 Las- en werkstukkabels
De volgende koperkabels en doorsneden worden aanbevolen:
FastMig M 320 50 – 70 mm²
FastMig M 420 70 – 90 mm²
FastMig M 520 70 – 90 mm²
In de volgende tabel staan kenmerkende belastingscapaciteiten van met rubber geïsoleerde
koperen kabels als de omgevingstemperatuur 25 °C en de temperatuur van de geleider 85 °C
bedraagt.
Kabel Inschakelduur (ID) Spanningsverlies / 10 m
100% 60% 30%
50 mm² 285 A 370 A 520 A 0,35 V / 100 A
70 mm² 355 A 460 A 650 A 0,25 V / 100 A
95 mm² 430 A 560 A 790 A 0,18 V / 100 A
U moet de laskabels niet overbelasten door spanningsverlies en verhitting.
OPMERKING! Zorg dat u altijd de betrouwbaarheid van de werkstukkabel en klem controleert.
Zorg dat het metalen oppervlak waarop de kabel aangesloten is, vrij is van metaaloxide of verf.
Controleer of de stekker correct op de stroombron is aangesloten.
3. BEDIENINGSSCHAKELAARS EN POTENTIOMETERS
3.1 Hoofdschakelaar I/O
Wanneer u de schakelaar in de I-stand zet, gaat het indicatielampje H11 aan de voorzijde
branden en is het apparaat gereed voor gebruik.
OPMERKING! Schakel het apparaat altijd in en uit met de stroomschakelaar en gebruik nooit de
netstekkers als schakelaar.
3.2 Indicatielampjes
De indicatielampjes van het apparaat melden de elektrische status:
Als het groene indicatielampje H11 brandt, betekent dit dat het apparaat ingeschakeld en
gereed voor gebruik is en dat het aangesloten is op de netspanning met de hoofdschakelaar
in de I-stand.
Wanneer H12 brandt, geeft dit aan dat de bescherming tegen oververhitting van het apparaat
is geactiveerd door oververhitting. De koelventilator blijft draaien en koelt het apparaat af.
Wanneer dit lampje uit is, is het apparaat klaar om mee te lassen.
3.3 Werking van koelventilator
In FastMig-stroombronnen bevinden zich twee tegelijk werkende ventilatoren.
• De ventilator start even wanneer de hoofdschakelaar in stand I gezet wordt.
• De ventilator begint te draaien als het apparaat opwarmt en blijft 1 tot 10 minuten
draaien nadat het lassen is beëindigd.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi FastMig M 320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi FastMig M 320 in the language / languages: Dutch as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info