686402
14
Zoom out
Zoom in
Previous page
1/32
Next page
12
FastMig MSF 53, 55, 57 / © Kemppi Oy / 1736
NL
2.10.1 Installeren van gases
E
B
D
G
A
F
C
LET OP! Plaats de gascylinder altijd verticaal op een plaats of onderwagen die daar speciaal voor
ingericht is. Sluit de afsluiter van de cylinder na het lassen.
Onderdelen van gasstroming regulator
A Gases afsluiter
B Druk regulatie schroef
C Verbindingsmoer
D Slangspil
E Hulsmoer
F Gases drukmeter
G Gasslang drukmeter
De volgende installatie instructies zijn geldig voor de meeste gasstroom regulator types:
1. Stap opzij en open de esafsluiter (A) gedurende een tijd om eventuele onzuiverheden weg te
blazen van de esafsluiter.
2. Draai de druk regulatieschroef (B) van de regulator totdat er geen tegendruk meer gevoeld kan
worden.
3. Indien aanwezig in de regulator, sluit naadventiel.
4. Installeer de regulator op de esafsluiter en maak deze vast door middel van de
verbindingsmoer (C) met een passende moersleutel.
5. Installeer de slangspil (D) en hulsmoer (E) in de gasslang en maak deze vast met een
slangklem.
6. Verbind de slang met de regulator en het andere uiteinde met de draadaanvoer-unit. Maak de
hulsmoer vast.
7. Open esafsluiter langzaam. Gases drukmeter (F) toont de druk van de es. Let op! Gebruik
nooit de hele inhoud van de es. De es moet worden gevuld tot de druk van de es 2 bar is.
8. Indien aanwezig in de regulator, open naaldventiel.
9. Draai de regulatieschroef (B) totdat de drukmeter van de slang (G) de gewenste stroom
(of druk) aangeeft. Bij het reguleren van de stroomhoeveelheid, dient de stroombron
ingeschakeld te zijn en tegelijkertijd dient de pistoolschakelaar ingedrukt te worden.
Sluit de esafsluiter na het lassen. Indien de machine gedurende langere tijd buiten gebruik is,
ontschroef de druk regulatieschroef.
2.11 HOOFDSCHAKELAAR I/O
Indien de hoofdschakelaar in de I positie wordt gedraaid, dan zal de signaallamp oplichten en de
hoofdschakelaar is gereed voor gebruik. De machine zal de lasmethode kiezen welke het laatst is
gebruikt voordat men de machine uitschakelde.
LET OP! Gebruik nooit de primaire steker om de machine aan of uit te schakelen.
2.12 WERKING VAN DE VLOEISTOFKOELUNIT, FASTCOOL 10
De waterpomp zal starten op het moment dat met lassen begonnen wordt. Na het lassen zal de
pomp ongeveer 5 min. nadraaien om de vloeistof te koelen.
Lees de bedieningsinstructies van de Fastcool 10 unit.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi FastMig 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi FastMig 55 in the language / languages: Dutch as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info