686408

Kemppi A7 TIG Orbital System 150 Manual

17
Zoom out
Zoom in
Previous page
1/48
Next page
17
A7 TIG Orbital System 150© Kemppi Oy 2016 1615
OPERATING MANUAL
3.7 Weld head control panel
W009315
A
B
C
D
A. Stop: immediately terminate the weld cycle and all
functions of the weld head.
B. Start Weld: initiate the weld program. LED light
beside the button is lit during the weld cycle. This is
also a soft way to stop welding.
C. Home position: welding can be started only when
the rotor gear is in its home position. It also allows
easy installation and removal of the workpiece.
1. Press the Home button to move the rotor gear
to the home position.
2. A red LED ignites next to this button, when the
rotor gear reaches its home position.
D. Rotation forward or reverse: with these buttons you
can move the rotor gear to either direction when
welding arc is not on. This is useful when mounting
or replacing the electrode or checking its condition.
3.8 Controller unit control panel
D
E
B
C
AF
G
I
H
A. Color LCD display: shows the setup values,
parameters and the soft key functions.
B. Stop: terminates the weld cycle and all weld head
functions.
C. Start Weld/Start Downslope: starts welding or
initiates downslope if welding is in progress.
D. USB port: connect memory stick to back up
programs and copy them from one power source
to another, to download QC programs, and to save
welding parameters and print them on a PC.
E. Cursor up: highlight the item above on display.
F. Cursor down: highlight the item below on display.
G. Enter: activate the highlighted item.
H. Control knob: increase/decrease the value of the
selected item.
I. Soft keys (4): select menu items shown on the
display depending on the operation mode (Setup,
Programming, Operation etc.)
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 TIG Orbital System 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 TIG Orbital System 150 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info