686369

Kemppi A7 MIG Welder 350 Manual

31
Zoom out
Zoom in
Previous page
1/66
Next page
31
A7 MIG Welder© Kemppi Oy 2018 1804
INTEGRATION GUIDE
5.2 Digital robot interface
5.2.1 Fieldbus settings
To view the eldbus information and to congure the
settings, go to Settings > Fieldbus.
The contents of the eldbus conguration view depend
on the eldbus type. Congure the eldbus settings in
accordance with your eldbus network setup.
The eldbus settings are stored in the eldbus module.
If you replace the module, the settings must be recongured.
The eldbus settings are not included in the system
backup le.
A factory reset does not aect the eldbus settings.
5.2.2 Selecting the proper I/O table
Communication between the A7 MIG Welder system and a
welding robot is based on input/output tables (I/O tables)
exchanged between the machines by eldbus cyclic I/O
transmission. The tables contain binary-level functions
that the robot uses for controlling and monitoring the
welding system.
The I/O tables and functions are described in detail in
Chapter 6, “Digital robot interface I/O reference.”
The A7 MIG Welder default I/O table is number 15.
Avoid changing this setting in new installations.
All other tables except table 15 are compatible with
the corresponding tables in the KempArc Pulse system. Note
that the A7 MIG Welder does not support all KempArc Pulse
tables.
To specify a non-default I/O table, go to Welding settings >
Welding system > General robot settings and enter the I/O
table number in the Interface mode eld. Click on the Save
button, in the bottom bar, to save the changes.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Welder 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Welder 350 in the language / languages: English as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info