686368

Kemppi A7 MIG Power Source 450 Manual

49
Zoom out
Zoom in
Previous page
1/67
Next page
49
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
4.8 Wire feeder
The A7 MIG Wire Feeder can be manually operated in
several alternative ways:
• By operating the wire feeder from the web user
interface
• By operating the wire feeder from the setup
panel
• By operating the wire feeder from the robot teach
pendant through the digital robot interface
• By using the illuminated buttons on the wire
feeder
1 2
3 4
Figure 4.27 Wire feeder buttons
1. Gas test button
2. Air blow button
3. Wire retract button
4. Wire inch button
The buttons on the wire feeder are illuminated.
All lights are o when:
• main power is o or
• user has not logged into the system (when log in
is required) or
• during welding.
One of the lights is o:
• Function is not allowed at the moment (for
example, no license for the function in question).
• If the button is pressed the light ashes three
times to indicate a prohibited function. The
indicated function is not carried out.
A light is on:
• The indicated function is available.
All lights are blinking:
• There is an error in the system that needs to be
acknowledged in the setup panel, in the web user
interface or from the robot teach pendant.
• Connection to the robot interface has been lost.
The system error cannot be acknowledged from the
wire feeder buttons.
4.8.1 Loading the filler wire
The ller liner is a consumable part which needs to be
changed if it has been worn. To load a new ller liner,
follow the following instructions.
Select the correct feed rolls and wire feed guide (wire
guide tube and middle wire guide tube) according to the
type of the ller wire. See Table 4.20, “Wire guide tubes
with Euro connector”, Table 4.21, “Wire guide tubes with
Panasonic connector”, Table 4.22, “Plastic wire feed rolls”
and Table 4.23, “Metal wire feed rolls” for details.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Power Source 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Power Source 450 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info