686364
6
Zoom out
Zoom in
Previous page
1/19
Next page
6
A7 MIG Gun 500-g© Kemppi Oy 2017 1712
OPERATING MANUAL
5.8 Product safety
Hazards caused by improper use
If improperly used, the device can present risks to people and physical property.
Use the device in accordance with its designated use only.
Do not convert or modify the device to enhance its performance without
appropriate authorization.
The device may only be used by qualied personnel.
The product has been developed and manufactured in accordance with state-of-
the-art technology and the recognized safety standards and regulations. These
operation instructions warn you against unavoidable residual risks to users, third
parties, devices, or other physical property.
Disregarding these warnings may result in risks to human life and health, harm to
the environment, or other physical damage.
The product may only be operated in unmodied, technically perfect condition,
within the limits described in these instructions.
Always observe the limit values specied in the technical data. Overloads lead to
destruction.
Safety features of the device must never be disassembled, bridged, or otherwise
bypassed.
During welding work outdoors, use suitable protection against the weather
conditions.
Check the electrical device for any damage and for proper functioning in
accordance with its designated use.
Never expose the electrical device to rain, and avoid damp or wet environments.
Protect yourself from electrical accidents by using insulating mats and wearing
dry clothing.
Never use the electrical device in areas subject to a risk of re or explosion.
Arc welding may cause damage to the eyes, skin, and hearing. When working
with the device, always use the prescribed protective equipment.
Metal vapors, especially from lead, cadmium, copper, and beryllium, are all
hazardous to the health! Ensure that sucient ventilation or extraction systems
are in use. Always ensure compliance with the legal limit values.
Using clean water, rinse work pieces that have been degreased with chlorinated
solvents, to prevent the risk of phosgene gas forming. Do not place degreasing
baths containing chlorine in the vicinity of the welding area.
Adhere to the general re protection regulations, and remove ammable
materials from the vicinity of the welding work area before starting work.
Keep suitable re-extinguishing equipment ready for use in the work location.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG gun - 500g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG gun - 500g in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info