686407
29
Zoom out
Zoom in
Previous page
1/33
Next page
29
A5 TIG Orbital System 75© Kemppi Oy 2016 1615
OPERATING MANUAL
5. TROUBLESHOOTING
5.1 Operation problems
Should you experience a malfunction from your machine,
please consult the troubleshooting sections below rst,
and complete some basic checks.
If the machine malfunction cannot be corrected with
these measures, contact your Kemppi maintenance
service workshop.
The problems listed and the possible causes are not
denitive but serve to suggest some standard and typical
situations that may present during normal environmental
use when using the A5 TIG Orbital System 75.
Problem: Check the following:
Machine won’t work Check that mains plug is connected correctly.
Check that mains power distribution is switched on.
Check the mains fuse and or circuit breaker.
Check that power source 0/I switch is ON.
Check that interconnection cable set and connectors
between the power source, controller unit, and weld head
are correctly fastened. See Installation section of this
manual.
Dirty, poor quality weld Check shielding gas supply.
Check and set gas ow rate.
Check gas type for application.
Check that correct welding program is selected.
Variable welding performance Tube is not round or weld head not properly centered.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A5 TIG Orbital System 75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A5 TIG Orbital System 75 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info