778308
12
Zoom out
Zoom in
Previous page
1/15
Next page
TC-400
DT Istr (TC-400) 05/17_Rev.1_05/18 12/15
ASSEMBLING THE APPLIANCE
Before using the appliance, fix its feet (included separately in the box) to the
appliance. The feet must be fixed to the appliance base using the 4 self-threading
screws supplied, making sure they are correctly placed in their corresponding
positions on the bottom of the appliance.
SETTING THE APPLIANCE AT WORK
NOTE: When the appliance is set at work for the first time or after long periods of inactivity, it could give a slight
smell. This smell will disappear a little while after turning it on.
1. Turn the rotary knob (4) clockwise as far as it will go.
2. Wait until the heater has warmed up the room to a suitable temperature and then turn the knob back slowly
until the control lamp goes out.
3. The thermostat is now set at he right temperature and will turn ON when temperature goes below this point,
or OFF when above.
FROST GUARD FUNCTION
By setting the rotary knob to the snowflake symbol , the frost guard will automatically turn on at approximately
+2 and protect against frost.
To ensure safe use, the device is equipped with a safety system that automatically switches off the heater when it
is overheated. In this case, disconnect the appliance from the power supply, wait for a few minutes, reconnect it
to the power supply and turn it on again.
CLEANING THE APPLIANCE
Before cleaning the appliance, make sure that the power plug has been disconnected from the mains socket and
let the appliance cool down.
Clean the external part of the appliance using a damp cloth, and dry it using a dry cloth.
Do not use any detergent or abrasive product, and make sure that no water flows inside the appliance.
APPLIANCE PRESERVATION
Do not throw the box, use it to store the equipment. When you dont use the appliance, store it in its original
packaging to protect from dust and store in a dry and clean place.
Model: TC-400
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local space heaters
only (select one)
Nominal heat output
Pnom.
0,45
kW
manual heat charge control, with integrated thermostat
NO
Minimum heat output
(indicative)
Pmin.
0
kW
manual heat charge control with room and/or outdoor
temperature feedback
NO
Maximum continuous
heat output
Pmax,c
0,45
kW
electronic heat charge control with room and/or
outdoor temperature feedback
NO
Auxiliary electricity
consumption
fan assisted heat output
NO
At nominal heat
output
elmax
NA
kW
Type of heat output/room temperature control (select
one)
At minimum heat
output
elmin
NA
kW
single stage heat output and no room temperature
control
NO
In standby mode
elSB
NA
kW
Two or more manual stages, no room temperature
control
NO
with mechanic thermostat room temperature control
YES
with electronic room temperature control
NO
electronic room temperature control plus day timer
NO
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemper TC-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemper TC-400 in the language / languages: English, French, Italian as an attachment in your email.

The manual is 0.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info