478058
10
Zoom out
Zoom in
Previous page
1/18
Next page
Emergency operationChanging batteries and notices
6 Changing batteries/Energy operation Kelvinator Air Conditioning
1 Push the back cover of wireless remote control.
(As shown in Fig 1.)
2 Take out the old batteries.
3 Insert two new AAA1.5V dry batteries, and pay attention
to the polarity. (As shown in Fig 2.)
4 Attach the back cover of wireless remote control.
Note:
• Whenchangingthebatteries,donotuseoldorvaried
batteries, otherwise, it may cause problems with the
remote control.
• Iftheremotecontrolisnotusedforalongtime,please
remove the batteries as old batteries may leak or corrode
and damage the remote controller.
• Toavoidinterference,theremoteshouldbeplaced1m
awayfromtheTVorstereoequipment.
• Forcorrectoperationtheremotecontrolshouldbe
placed within visible range of the air conditioner.
• Iftheremotecontroldoesnotoperatenormally,please
remove and refit the batteries. If abnormal operation
continues, replace with new batteries.
• Tooperatetheairconditioner,pleasepointtheremote
control at the indoor unit in order to improve the
sensitivity of the main unit.
1
3
4
2
Fig.1
Fig.2
Whentheremotecontrolislostordamaged,pleaseuse
the manual switch on the main unit. In that case, the unit will
operate in AUTO mode and the temperature setting or fan
speed can not be changed.
The manual switch can be operated as below:
AUTO SWITCH
Turn on the unit
Press AUTO/STOP button to enter AUTO mode.
The air conditioner will select the mode (COOL, HEAT,
FAN) automatically according to the room temperature for
reaching best comfort.
Turn off the unit
Press the AUTO/STOP button to switch off the unit.
The operation mode is seen in the following table.
Mode Model Temperature setting Airflow rate
AUTO COOLING 25°C (COOL, FAN) AUTO
AUTO HEATING PUMP 25°C (COOL, FAN) AUTO
AUTO HEATING PUMP 20°C (HEAT) AUTO
This switch is to be used only when the remote control
is missing.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kelvinator KSV26HRC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kelvinator KSV26HRC in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info