cáÖìêÉ=OJO
Model 2001 rear panel
5 SCANNER
Optional Model 2001-SCAN Scanner Card installs in this slot
6 AMPS FUSE
Holds current input fuse (2A, 250V, fast blow, 520mm)
7 DIGITAL I/O
A DB-9 connector for the TTL-compatible digital I/O with on in-
put and four outputs
8 TRIGGER LINK IN and OUT
Two 8-pin micro DIN connectors for sending and receiving trig-
ger pulses among other instruments. (See paragraph 3.7.7)
9 IEEE-488 CONNECTOR
Connects the instrument to the IEEE-488 (GPIB) bus. NOTE:
Use shielded IEEE-488 cables
1 INPUT CONNECTIONS
INPUT HI and LO: Used for making DC volts, AC volts,
and 2-wire resistance measurements.
AMPS: Used in conjunction with INPUT LO to make DC
current and AC current measurements.
SENSE 4 WIRE HI and LO: Used with INPUT HI and
LO to make 4-wire resistance measurements
2FAN
Keep filter clean to ensure proper instrument cooling.
3 POWER LINE INPUT
90-134VAC and 180-250VAC (universal); 50, 60, or
400Hz (self-identifying)
WARNING: Connect to grounded outlet using 3-wire
power cord.
4 LINE FUSE
Provides protection on the AC power line, Replace only
with 0.5A, 250V, slow blow, 520mm
WARNING:NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
WARNING:NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
CAUTION:FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
CAUTION:FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
U.S.A.
