738045

Keiser M3i lite Indoor Group Cycle Manual

22
Zoom out
Zoom in
Previous page
1/24
Next page
M3i lite INDOOR GROUP CYCLE 22
Every Workout
• Bike is properly stabilized, level to the oor (refer to “Base Stabilizer” section, page 14).
• Check that parts most susceptible to wear are not damaged or broken (Adjustment
Knobs, L-Handle, Pedal Cages, Pedal Straps, and Seat Upholstery).
• Cleaning: Target areas in the sweat path with a dry soft towel or cloth.
Monthly
• Clean the external body/parts thoroughly, targeting areas that come in contact with
sweat, using a damp soft towel and a mild detergent (neutral, non-caustic). Wipe dry
the equipment.
Quarterly
• Apply wax to protect the paint nish on metal parts:
1. Wipe down and thoroughly clean the bike prior to applying wax.
2. Use an easily applied automotive treatment such as Meguiar’s® Quik Detailer Mist
and Wipe.
3. Target areas that come in contact with sweat as they are most vulnerable to rust.
NOTE: Failure to apply a coat of wax to high-sweat areas at a minimum of four times a
year will decrease paint and frame life due to corrosion and will void the warranty.
Annually
• Check to ensure all external visible screws and nuts are not loose and that they are
tightened.
• Check parts most susceptible to wear and replace if damaged or broken (Adjustment
Knobs, L-Handle, Pedal Cages, Pedal Straps, and Seat Upholstery).
• The low battery signal (“LO-BA”) will appear on the computer display when it is time to
replace the batteries (two AA batteries, refer to “Computer Battery Replacement” on
page 23 for complete instructions).
NOTE: For establishments with multiple bikes, replacement of all computer batteries at
the same time is recommended.
• Apply LPS 3® Rust Inhibitor or WD-40® Long-Term Corrosion Inhibitor to the Left Bottom
Bracket Bearing and to the clip-in portion of each Pedal.
• Apply lubricant to the Adjustment Knobs:
1. Unscrew and remove the Adjustment Knobs.
2. Clean threads with a lint-free cloth.
3. Apply a moderate amount of lubricant to threads, then replace the Adjustment Knobs.
NOTE: Both the threaded stud and the threaded insert nut are stainless steel. It is critical to
keep the threads lubricated with a heavy grease (preferably white or clear in color), such
as HYDROTEX® Acculube #2 or any compound with equivalent anti-wear and corrosion
resistant properties.
Weekly
for the
1st Month
• Check to ensure that the bike is in safe proper working order (perform the full “Proper
Operation Check,” page 12).
• Check that parts most susceptible to wear are not damaged or broken (Adjustment
Knobs, L-Handle, Pedal Cages, Pedal Straps, and Seat Upholstery).
CAUTION: Routine maintenance is an essential part of maintaining the highest level of equipment safety, as
well as optimal equipment performance. Immediately replace damaged, worn, or broken parts and do not use
the bike until all repairs have been completed and tested by a certied Keiser technician.
MAINTENANCE
PREVENTATIVE MAINTENANCE SCHEDULE
… 22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M3i lite Indoor Group Cycle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M3i lite Indoor Group Cycle in the language / languages: English as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info