738043

Keiser M3i - Indoor Group Cycle Manual

12
Zoom out
Zoom in
Previous page
1/24
Next page
M3i INDOOR GROUP CYCLE 12
9
11
(a) Clean the Pedal threads using a clean cloth, then
apply Loctite® 242 Threadlocker (Item G) to the leading
threads of the Pedals.
(b) Use a 15 mm Open-end Wrench to install the Pedals
to the Crank Arms. LHS Pedal stamped “CR-L” thread left
(counter-clockwise); RHS Pedal stamped “CR-R” thread
right (clockwise). Torque Pedals to 35 ft-lbs (47 Nm) using
a Torque Wrench, 15 mm Crowfoot, and 6-inch extension.
Handlebar Slide installation.
(a) Remove the four Screws from the Handlebar Tube
using a 6 mm Allen Wrench. NOTE: Screw threads will
contain anti-seize lubricant.
(b) Position the Handlebar Slide (Item I), numbers
face up, aligned with the screw holes. Attach the
Handlebar Slide to the Handlebar Tube using the
four Screws previously removed, using a 6 mm Allen
Wrench.
M3i Model: Install the Media Tray by wedging in between
the Handlebar.
Assembly is now complete. Continue to “Set Up and
Operation” on the following page. Be sure to perform
the “Proper Operation Check” (page 14), including Rust
Inhibitor application, before use.
10
12
Left-Hand Side (LHS) Pedal
turn counter-clockwise
Right-Hand Side (RHS) Pedal
turn clockwise
Apply Loctite® 242
Handlebar installation.
(a) Remove the screw from the
L-Handle (Item J) using a 5 mm
Allen Wrench.
(b) Insert the Stud through the
Handlebar Spacer (tab side down,
facing toward the bike), then
through the Handlebar Slide slot
to attach the Handlebar.
(c) Place the L-Handle onto the
Stud, facing away from the Bike, then re-install the
Screw and Washer using a 5 mm Allen Wrench. Finish
with Cap.
HOW TO ASSEMBLE THE M3i BIKE
Handlebar Slide
Handlebar Tube
Screws
Screw
Stud
L Handle
Screw / Washer
Cap
Handlebar Spacer
(tab)
WARNING: Failing to install the Pedals with
Threadlocker, or crossing the threads, will result
in mechanical failure and may cause serious injury.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M3i - Indoor Group Cycle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M3i - Indoor Group Cycle in the language / languages: English as an attachment in your email.

The manual is 9,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info