738033
22
Zoom out
Zoom in
Previous page
1/28
Next page
WARNING: Perform the operation below before riding to make sure the bike is fully operational. Failing to test a bike prior
to normal use will void your warranty and could result in serious injury.
CHECKING FOR PROPER OPERATION
Pre-Ride Checklist
Please inspect bike carefully and thoroughly before riding.
All Parts Correctly Installed
Acorn Nuts Torqued At 45 Nm (35 ft-lbs)
 Pedals Loctited and Torqued To 45 Nm (35 ft-lbs)
All Screws and Nuts Properly Torqued and Tightened
 Handlebar and Seat Adjustments Operate Properly
 Bike Has Been Polished With Paste or Spray Wax and a Clean Cloth
 Computer Installed and Calibrated and In Working Order (See “Calibrating The Computer”)
Test Ride
Your bike should now be ready to test ride.
Adjust the seat and handlebar for proper height and comfort.
Secure your feet in the pedals.
Move the shifter toward yourself and down and begin pedaling.
The computer should wake up and display “ODO” and total distance ridden across the bottom. After approximately 10
secs “ODO” will change to gear and trip.
Now move the shifter up and note the gear changing on the computer and the resistance getting harder.
Ride at various speeds and resistances to check for noise and vibration.
Move the shifter to full forward position to check that the emergency brake stops the ywheel from turning.
You have completed the test.
Enjoy your ride.
NOTE: Since we are always striving to improve our products; our products are subject to change without notice.
NOTICE
Users, agents or anyone directing the use of this equipment shall determine the suitability of the product for its intended
use, and said parties are specically put on notice that they shall assume all risk and liability in connection herewith.
1.
2.
3.
4.
5.
6.
7.
8.
9.
20
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M3 in the language / languages: English as an attachment in your email.

The manual is 44,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info