Manual KEF KIT200 (page 25 of 104) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

67097

Zoom out

Zoom in

1/104

Theatre systems sold in the USA.)

PAL

Choose this if all programming is per the PAL standard. (This is the broadcast

standard across much of Europe and is the default for KEF Instant Theatre

systems sold in the UK and Europe.)

Auto

Choose this if using a multi-standard TV and for programming that is a mixture of

NTSC and PAL,

as in countries where DVDs might not all be published in the same format.

DVD Output

DVD Output determines which video output, in addition to Composite (RCA), will

carry video signals from the KEF Instant Theatre to your TV. (You will see a

prompt message when selecting a new DVD output, highlight and SELECT “YES” to

confirm any changes to this setting. This is to prevent you setting an output video

format which is not displayable on your TV). It should be noted that a SCART lead

is provided in Europe because many TVs have this connection and it gives better

video quality.

If using a SCART lead then the setting of DVD Output is not necessary.

Composite/S

Choose this setting if the KEF Instant Theatre will be connected to only the

Composite (RCA) input or the S-Video input of the TV.

Component

Choose this setting if the KEF Instant Theatre will be connected to the Component

(RGB) input of the TV. In this case, connect the Composite input as well, so that

you can view non-DVD sources and to allow you to set the component and

progressive options whilst the default DVD output is composite and S-video only.

When watching a DVD, switch the input of the TV to “Component” or “RGB.” (The

KEF Instant Theatre’s Component and S-video outputs cannot both be active at the

same time.) Component gives the best video quality for plasma, projector, or

other component compatible televisions or monitors.

Progressive

Select “On” if using the Component output for DVD programs with a TV that

supports

‘progressive scan’. Otherwise, select “off”. Progressive scan gives improved

picture quality on a compatible monitor or television but must be used in

conjunction with component DVD Output.

It will output PAL or NTSC progressive output as defined by the source material.

Audio Menu

The Audio menu allows for calibration of the KEF Instant Theatre for use in

unusually shaped or furnished rooms, and for turning off the surround sound, if

this should be desired. To adjust bass/treble use the dedicated buttons on the

remote control.

Surround Sound

Normally, the default of “All purpose” is suitable for all users, but one may

choose another setting for surround sound as follows:

Off (Stereo)

Choose this setting to turn surround sound off. Stereo mode must be selected if

you are using the ‘Record/multi room output’ on the rear of the subwoofer to

record or drive a separate pair

of speakers.

Matrix

Use this setting to hear some degree of surround sound from monophonic

recordings and movies.

Movie

Use this setting to experience Dolby Pro Logic II Movie decoded audio which

produces different surround effects for films and video games. Leave MOVIE

switched off if you are listening to MUSIC.

All purpose

As the name suggests, this setting will optimise your system depending on what

program material is present with the exception of monophonic recordings. If the

source contains Dolby Digital

or DTS

signals then these will always play by

default. Other sources will be played in a configuration of Prologic II chosen by

KIT200_Manual.qxd 10/1/11 15:04 Page 25

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KEF KIT200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KEF KIT200 Manual

Product: