771572
56
Zoom out
Zoom in
Previous page
1/84
Next page
Alarms
Code Description Solution
E0 Error of sensor T5U (upper water temperature sensor)
Maybe the connection between sensor and PCB has released
or sensor has been broken.
Contact a qualified person to service the unit.
E1 Error of sensor T5L(lower water temperature sensor)
Maybe the connection between sensor and PCB has released
or sensor has been broken.
Contact a qualified person to service the unit.
E2 Storage tank and Wired Controller communication error Maybe the connection between controller and PCB has
released or PCB has been broken.
E4 Evaporator temperature sensor T3 error
Maybe the connection between sensor and PCB has released
or sensor has been broken.
Contact a qualified person to service the unit.
E5 Ambient temperature sensor T4 error
Maybe the connection between sensor and PCB has released
or sensor has been broken.
Contact a qualified person to service the unit.
E6 Compressor discharge temperature sensor TP error
Maybe the connection between sensor and PCB has released
or sensor has been broken.
Contact a qualified person to service the unit.
E8
Electric leakage error
If PCB current_induction_circuit check the current
difference between L,N >14mA, system consider it as
"electric leakage error"
Maybe some wires have been broken or bad wire connection.
Contact a qualified person to service the unit.
E9 Compressor suction temperature sensor TH error
Maybe the connection between sensor and PCB has released
or sensor has been broken.
Contact a qualified person to service the unit.
EE E-heater open-circuit error IEH (Current difference E-
heater on and off )<1A
Maybe the E-heater has been broken or bad wire connection
after repair.
Contact a qualified person to service the unit.
EF Clock chip error
Maybe the chip has been broken, but unit can work well without
clock-memory, so it is needed to reset clock when power put on
again.
If necessary, contact a qualified person to service the unit.
Ed E-EPROM chip error Contact a qualified person to service the unit.
10 CONTROL
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun Solar Compak KHPA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Solar Compak KHPA2 in the language / languages: English as an attachment in your email.

The manual is 9.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info