771567
9
Zoom out
Zoom in
Previous page
1/32
Next page
KRE-500DX1 Sound power levels Lw at center band frequencies Total Lw
Hz 63 125 250 500 1000 2000 4000 8000
Supply duct dB(A) 32.8 37.9 54.9 55.5 54.2 52.2 44.0 33.9 60.5
Exhaust duct dB(A) 32.8 46.9 54.2 55.6 55.0 52.2 44.0 33.9 60.7
Outside the casing dB(A) 27.8 33.1 42.8 41.3 40.0 37.4 12.7 9.0 47.0
1.6 Sound power levels
Noise at nominal working point
KRE-1000DX1 Sound power levels Lw at center band frequencies Total Lw
Hz 63 125 250 500 1000 2000 4000 8000
Supply duct dB(A) 46.4 52.9 60.1 59.3 59.0 59.0 52.5 47.9 66.0
Exhaust duct dB(A) 45.8 52.5 57.0 58.1 56.6 57.2 52.0 47.9 64.1
Outside the casing dB(A) 41.1 41.4 44.8 44.3 43.0 43.2 20.3 17.9 51.0
Noise at nominal working point
SECTION 2 - TRANSPORT
2.1 Packing
The regenerators and their accessories are inserted in cardboard boxes that will have to remain integral until the moment of the assembly.
The components that, due to technical requirements, are not assembled, are supplied packed in a suitable covering and fixed to the inside or
outside of the unit.
2.2 Handling and transport
For the handling, in function of the weight, use adequate means in conformity to the directive 89/391/EEC and successive modifications.
The weight of every single machine is shown on the attached technical data sheet.
Avoid rotations without control.
Take utmost care during loading operations: all the machines must be loaded and stored in the truck interposing opportune spacers to safe-
guard all protruding parts like water couplings, handles, hinges.
2.3 Control upon reception
Upon reception of the goods, please carry out a control of all the parts, verifying that the transport has not caused damages. All damages must
be communicated to the carrier, putting a reserve clause on the delivery note and specifying the type of damage.
2.4 Storage
In case of long term storage, keep the machines protected from dust and from all sources of vibrations and heat.
The manufacturer company declines every responsability for damages due to uncorrect unloading or not sufficient protection
against atmospheric agents.
pag. 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KRE-500DX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KRE-500DX1 in the language / languages: English as an attachment in your email.

The manual is 2.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info