771571
29
Zoom out
Zoom in
Previous page
1/48
Next page
8 - ELECTRIC CONNECTIONS
pag. 29
8.4 SYSTEM ADDRESS AND NETWORK ADDRESS SETTING
/ '
After first powered on, please set the system address by remote controller or wired controller, the address range is
0-63, the indoor
s
nit addresses of the same system can not be repeated.
0'
Display as the table 2, when there are different ENC1, the address setting will be different (Fig.14).
Each independent control box needs to be set an address, this address is an actual address; when the capacity code
ENC1 is selected to be E-F, this indoor unit independent control box will produce virtual address(es) with
corresponding quantity based on the set actual address, and if an address has been an actual address or virtual
address, then this address can not be the actual address or virtual address of other indoor unit in the same system;
For example, if there are two independent control boxes in the same system, one of the capacity code is E, the setting
actual address is 5, then according to the table 2 this control box will produce virtual address as 6, and then the
actual address and the virtual address
m
f the other independent control box can not be any one of 5, 6. The actual
address and the virtual address should less than or equal to 63.
1'
The indoor unit quantity detected by outdoor unit will be the sum of the actual address quantity and the virtual
address quantity, e.g. when the capacity code of independent control box is E, the setting actual address is 5, then it
will produce virtual address 6, and then the indoor unit quantity detected by outdoor unit will be 2.
2'
The outdoor unit can not use auto addressing for to set the address for the indoor unit without address; only the indoor
unit has address then can the outdoor unit to be set auto addressing;
3'
When the independent control box system connects to the indoor
s
nit centralized controller, the actual address and
the virtualaddress will be displayed on the centralized controller, e.g. when the then the actual address 5 and virtual
address 6, will be displayed on the centralized controller, that is to say, it equals to 2 indoor units, and the states of 2
indoor units will be kept in the same;
4'
The network address is the same as the indoor unit address, no need to setting separately.
SW4-2 ENC1 Corresponding Virtual Addresses Qty of occupied addresses
00~D No virtual address 1
0 E-F Actual address +1 / / / / 2
00-1 Actual address +1 / / / / 2
02-4 Actual address +1 Actual address +2 Actual address +3 / / 4
Table 5-2
0
1
3
4
5
6
7
8
9
A
B
C
D
E
F
fig. 15
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KRE-3100DX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KRE-3100DX1 in the language / languages: English as an attachment in your email.

The manual is 3.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info