771570
39
Zoom out
Zoom in
Previous page
1/48
Next page
pag. 39
10 - ROUTINE MAINTENANCE
fig. 19
Clean the net under a jet of hot water and then dry it accurately with a dry cloth.
Check if the glass is damaged; in this case, replace it.
As soon as you notice a whitish layer on the metallic grid inside the tube, it means that the tube has to be
replaced. Capacitor tube usually happens every 18-24 months.
Put again the metallic net on the tube by overlapping it to the internal grid.
fig. 18
Control that the small flap (L fig. 19) touches the metallic net and presses on the quartz glass of the capacitor (C
fig. 19).
Clean externally the equipment.
Screw gently the quartz capacitor on its site.
Insert again the capacitors in the hole of the box by putting the cover near until it fully adheres to the site of the box.
Fasten the fixation screws of the cover of the box.
Reconnect to the electrical socket.
Verify the working of the equipment. Now a light noise has to be heard.
WARNING
Do not use cleansing agents, soaps or similar detergents
WARNING: keep absolutely a minimum distance of 6-7 mm from the basis of the tube.
10.3 HALF-YEARLY CONTROLS
Periodical check on BIOX-DX purifying system
It is periodically necessary to check the condenser cleaning. The frequency of the verification must be at least six
months, but always carried out when there is a decrease in the efficiency of the equipment. To carry out the verification
and cleaning operations scrupulously follow the following instructions.
Switch off the equipment by taking out the plug from the electrical socket.
Remove the 4 fixation screws of the cover of the box (fig. 18).
Remove the cover perpendicular to the plane of the box until the quartz capacitors are out of the box.
Place all on a flatbed.
Gently unscrew the capacitor (C fig. 19).
Remove the external net (R fig. 19) of the tube: if the operation results to be difficult, rotate slightly the net around the
quartz capacitor.
Clean the capacitor glass with a wet cloth.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KRE-2300DX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KRE-2300DX1 in the language / languages: English as an attachment in your email.

The manual is 3.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info