771568
10
Zoom out
Zoom in
Previous page
1/32
Next page
SEZIONE 3 - INSTALLATION AND START UP
3.1 Definitions
CUSTOMER- The customer is the person, the agency or the company, that has acquired or rented the unit and that uses it for the conceived
purpose.
USER / OPERATOR - The operator or user is the physical person who has been authorised from the customer to operate with the machine
SPECIALISTIC STAFF - Intended are all those physical persons who have achieved a specific training, are therefore in a position to recognize
the dangers deriving from the use of this machine and are able to avoid them.
3.2 Safety Standards
The Manufacturer/Distributor Company declines whichever responsability for the non observance of the emergency and prevention norms
described below.
It declines furthermore responsibility for damages caused by an improper use of the unit and/or by modifications carried out without authoriza-
tion.
The installation must be carried out by expert and qualified staff.
During installation operations, use suitable accident-prevention clothing, as an example: glasses, gloves, etc as indicated by the 686/89/EEC
and successive norms.
During installation, operate in absolute safety, in clean surrounding and free from impediments.
Respect the laws in force in the Country in which the unit is installed, concerning the use and the disposal of the packings and the products
used for cleaning and maintainig the machine and follow the manufacturer instructions of such products.
Before putting the unit in function, check the perfect integrity and safety of all components and of the entire system.
Avoid at all cost to touch the parts in motion or to intefere with the same ones.
Do not proceed with cleaning or maintenance operations, before switching off the electric power supply.
The maintenance and the substitution of damaged or worn out parts of the unit must be carried out by qualified staff only and following the
indications contained in this handbook.
Spare parts must correspond to the requirements defined by the Manufacturer Company.
In case of dismantling of the unit, follow the relevant antipollution norms.
N.B. When using the unit, the installer and the user must take into account and place remedy to all the other types of risk connected with the
sistem. As an axample risks deriving from entry of foreign bodies, or risks deriving from the conveying of dangerous gases that are inflamma-
ble or toxic at high temperature.
3.3 Preliminary operations .
Check the perfect integrity of all components.
Check that in the packing all the accessories for the installation and the relevant documentation, are included.
Transport the packed section as close as possible to the installation place.
Do not put tools or weights over the packed unit.
3.4 Choice of the installation place
Place the unit on a solid structure that shall not causes vibrations and that is solid enough to support the weight of the machine.
Do not place the unit in rooms where inflammable gases, acids or aggressive and corrosive substances may be present. These could dama-
ge the different components in an irreparable way.
Foresee a minimum free space as shown on the following figures, to make possible the carrying of scheduled and not scheduled maintenan-
ce; in order to do maintenance to BIOX-DX system, allow accessibility from lower side around supply section with DX coil.
pag. 10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KRE-1000DX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KRE-1000DX1 in the language / languages: English as an attachment in your email.

The manual is 2.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info