771552
24
Zoom out
Zoom in
Previous page
1/32
Next page
20
Operating the Remote Controller
5.14 System address setting
Automatic Allocation of the IDU Address and Centralized Controller.
Connection of the IDU.
1. The network address and the indoor unit address are the same,
and do not have to be congured separately.
2. When this indoor unit is connected to a V6 (or V4+) outdoor unit,
the setting of the IDU address is completed using the communications
between the indoor unit and the outdoor unit. The IDU address does
not need to be set separately. The centralized control of the indoor
unit is completed on the outdoor unit. For details, refer to the manual
on the V6 (or V4+) outdoor unit.
Note:
Once the centralized control function for the V6 (or V4+) indoor unit has been
completed on the outdoor unit, the DIP switch on main control board of the V6 (or
V4+) outdoor unit must be set to auto addressing. Otherwise, the indoor unit in
the system will not be controlled by the centralized controller.
Setting the IDU address via the wired controller:
1. If the indoor unit has no address, use a two-way communication
wired controller [for example: WDC-86E/KD] to set the address of the
indoor unit.
2. Press and hold “▲” and “▼” for 8 seconds to go to IDU address
setting screen. Press “ “ to exit the setting screen.
3. You can query and set up the address of the indoor unit on the
address setting screen.
4. Once you have entered the address setting screen, the wired con-
troller displays the current address if the indoor unit has an address.
5. After entering the address setting screen, if the indoor unit has no
address, press the “▲” or “▼” button to adjust the address value.
6. Press “ “ to send the indoor unit the address currently displayed
on the wired controller.
7. The wired controller will exit the address setting state after 60 se-
conds, or you can press “ “ to exit the address setting state.
8. In the address setting state, the wired controller does not respond
to or forward any remote control signal.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KI-04 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KI-04 S in the language / languages: English as an attachment in your email.

The manual is 6.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KI-04 S

Kaysun KI-04 S User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info