771478
22
Zoom out
Zoom in
Previous page
1/44
Next page
Fig.7-1
Use the correct screwdriver to tighten the terminal screws. Small screwdrivers can damage the screw head and prevent
appropriate tightening.
Over-tightening the terminal screws can damage the screws.
Attach a ground fault circuit interrupter and fuse to the power supply line.
In wiring, make certain that prescribed wires are used, carry out complete connections, and fix the wires so that outside force
cannot affect the terminals.
7.3
NOTE
MCA : Max. Circuit Amps. (A)
MFA : Max. Fuse Amps. (A)
IWPMIndoor Water Pump Motor
FLA : Full Load Amps. (A)
7.4 Before connecting the wiring
Fig.7-2
1. Select the wire diameters( minimum value) individually for each unit based on the table below.
2. Select circuit breaker that having a contact separation in all poles not less than 3 mm providing full disconnection
where MFA is used to select the current circuit breakers and residual current operation breakers:
1.Remove the bolt in the lower left corner of indoor unit.
2.open the front panel.
3.Remove the cover of the control box.
19
17.5mm
Power Current IWPM
System Hz Voltage Min. Max. MCA MFA kW FLA
(V) (V) (V) (A) (A) (A)
100/190(3kW heater) 50 220-240/1N 198 264 16.9 20 0.087 0.66
100/240(3kW heater) 50 220-240/1N 198 264 16.9 20 0.087 0.66
160/240(3kW heater) 50 220-240/1N 198 264 16.9 20 0.087 0.66
100/190(6kW heater) 50 220-240/1N 198 264 33.1 40 0.087 0.66
100/240(6kW heater) 50 220-240/1N 198 264 33.1 40 0.087 0.66
160/240(6kW heater) 50 220-240/1N 198 264 33.1 40 0.087 0.66
100/190(9kW heater) 50 380-415/3N 342 456 16.9 20 0.087 0.66
100/240(9kW heater) 50 380-415/3N 342 456 16.9 20 0.087 0.66
160/240(9kW heater) 50 380-415/3N 342 456 16.9 20 0.087 0.66
Optional
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KHPI-BI-10VR2XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KHPI-BI-10VR2XL in the language / languages: English as an attachment in your email.

The manual is 38.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KHPI-BI-10VR2XL

Kaysun KHPI-BI-10VR2XL User Manual - German - 44 pages

Kaysun KHPI-BI-10VR2XL User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info