771477
38
Zoom out
Zoom in
Previous page
1/44
Next page
Water pressure
Check the water pressure, if it is below 1 bar,fill water
to the system.
Water filter
Clean the water filter.
Water pressure relief valve
Check for correct operation of the pressure relief
valve by turning the black knob on the valve
counter-clockWise:
The following checks must be performed at least once a
year by qualified person.
Carry out a thorough visual inspection of the switch
box and look for obvious defects such as loose
connections or defective wiring.
Check for correct operation of contactors with an
ohm meter. All contacts of these contactors must be
in open position.
Pressure relief valve hose
Check that the pressure relief valve hose is
positioned appropriately to drain the water.
Backup heater vessel insulation cover
Check that the backup heater insulation cover is
fastened tightly around the backup heater vessel.
Domestic hot water tank pressure relief valve (field
supply).
Check for correct operation of the pressure relief
valve on the domestic hot water tank.
Unit switch box
If you do not hear a clacking sound, contact your
local dealer.
In case the water keeps running out of the unit,
close both the water inlet and outlet shut-off
valves first and then contact your local dealer.
35
9 TEST RUN AND FINAL CHECKS
The installer is obliged to verify correct operation of unit
after installation.
9.1 Final checks
Before switching on the unit, read following recommendations:
When the complete installatio n and all necessary
settings have been carried out, close all front panels
of the unit and refit the unit cover.
The service panel of the switch box may only be
opened by a licensed electrician for maintenance
purposes.
9.2 Test run operation (manually)
If required, the installer can perform a manual test
run operation at any time to check correct operation
of air purge, heating, cooling and domestic water
heating, refer to 8.4.11 "TEST RUN" .
10 MAINTENANCE AND SERVICE
In order to ensure optima l availabilit y of the unit, a number
of checks and inspection s on the unit and the field wiring
have to be carried out at regular intervals.
This maintenance needs to be carried out by your local
technician.
In order to ensure optima l availabilit y of the unit, a number
of checks and inspection s on the unit and the field wiring
have to be carried out at regular intervals.
This maintenance has to be carried out by your local
technician.
DANGER
ELECTRIC SHOCK
Before carrying out any maintenance or
repairing activity, must switch off the power
supply on the supply panel.
Do not touch any live part for 10 minutes after
the power supply is turned off.
The crank heater of compressor may operate
even in standby.
Please note that some sections of the electric
component box are hot.
Forbid touch any conductive parts.
Forbid rinse the unit. It may cause electric
shock or fire.
Forbid leave the unit unattended when
service panel is removed.
15 INPUT DEFINE
NO
15.11 PUMP SILENT MODE
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KHPI-BI-10VR2L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KHPI-BI-10VR2L in the language / languages: English as an attachment in your email.

The manual is 38.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KHPI-BI-10VR2L

Kaysun KHPI-BI-10VR2L User Manual - German - 44 pages

Kaysun KHPI-BI-10VR2L User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info