Manual Kaysun KFC-SE-2T-250D (page 12 of 20) (English)

771457

Zoom out

Zoom in

1/20

I&O manual

Replacement of the heat-exchanger coil

Procedure for removal of the heat-exchanger:

1 Remove the casing (on units I and II);

2 Isolate the flow and return water pipes;

3 Disconnect the coil from the water system;

4 Remove the screws on both sides which hold the

coil to the structure of the unit;

5 Take out the heat-exchanger coil.

Fig.3-12

6 Procedure for refitting the heat-exchanger is a

reversal of the above.

DISMANTLING THE UNIT AND DISPOSAL OF

HARMFUL SUBSTANCES

PRESERVE THE ENVIRONMENT!

We care about protecting the environment. When the unit is

dismantled it is important to adhere scrupulously to the following

procedures.

The unit should only be dismantled by a firm authorized

for the disposal of scrap machinery.

The unit is composed of materials considered as

secondary raw materials and the following conditions must

be observed:

1 If the system has antifreeze as an additive, it must not be

just dumped, because it causes pollution. It should be

collected and suitably disposed of.

2 The electronic components (electrolytic condensers)

should be considered special waste, and as such they

should be delivered to a firm authorized to collect them.

3 The expanded polyurethane rubber insulation on the

pipes and the expanded polyethylene mesh, the

expanded polyurethane and sound-absorbent sponge

lining the bodywork must be removed and processed as

urban refuse.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KFC-SE-2T-250D in the language / languages: English as an attachment in your email.

The manual is 1.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kaysun KFC-SE-2T-250D Manual

Product: