771445
4
Zoom out
Zoom in
Previous page
1/22
Next page
02
WARNING
A situation that may lead to injury.
NOTE
A situation that may cause damage to the unit or
loss of property.
INFORMATION
Indicates a useful hint or additional information.
For any faults not covered by the Manual, please contact the manufacturer immediately.
Tampering with the unit can result in very hazardous situations. The manufacturer is not liable for any damages caused by
tampering with the unit. The consequences for failing to abide by the Manual shall be borne by the user on its own.
2.1 Meaning of Various Labels
2.2 Warning
Ask professional staff to install (install for the rst
time, change the place of the unit or re-install) and
repair the unit and its parts. The installation operator
must have acquired the relevant professional
qualication. Do not attempt to install or repair the air
conditioner by yourself, as any improper operations
may lead to re, electric shock, personal injury or
water leakage.
Make sure the unit is grounded reliably in accordance
with the laws. Otherwise, it may cause electric shock.
Stop using the air conditioner and consult your
dealer in case of any abnormalities. Otherwise, re or
electric shock may occur.
Do not attempt to maintain or alter the unit by
yourself. Improper operations may cause water
leakage, electric shock or re.
Make sure the leakage protection device is installed,
or electric shock may occur.
Do not wash the unit with water, or electric shock may
occur.
To avoid electric shock, do not place any water-lled
container on the unit.
Do not operate the switch with wet hands, or electric
shock may occur.
Do not put your ngers or other objects into the unit, it
can result in serious injury.
Do not obstruct the air supply channel, it may result in
personal injury or damages to the unit.
Check that the supporting structure of the unit is
securely installed after a long period of use, to
prevent fall accidents.
Make sure the installation base and hoisting are
robust and reliable; otherwise, the unit may fall and
lead to accidents.
Do not expose yourself to cold air over a long period.
Too low temperature may cause harm to your health.
Do not expose animals or plants to air outlet to avoid
any harm.
This unit is intended for air handling only. Do not use
it for animal rearing.
Do not install the unit where ammable gas may leak.
Otherwise, re may occur. Do not install the unit in
potentially explosive atmospheres.
Keep the unit far away from combustible spray to
avoid re.
Use proper fuse. Do not use iron wire or copper
wire, as it may cause re or unit abnormality.
When connecting power supply to the unit, follow
the regulations of the local electric company.
Provide separate power switch to ensure the unit
can be disconnected from power properly.
Do not use this unit to store spare parts or other
items.
Please attach enough importance to the signs and
symbols indicated on the unit. Any other potential
hazards not covered in the Manual (if any) should
be specied in labels attached to the unit.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualied person in order to avoid a hazard.
2.3 Note
Read the Manual carefully and perform a safety
inspection in advance so that you can be fully
aware of the possible dangers as you use or install
the unit.
The manufacturer shall not be liable for any
personal or animal injury or damage to any object
caused by incorrect installation, adjustment,
maintenance or improper use.
The manufacturer is not held liable for any
damages resulting from faulty operations against
this Manual.
Do not expose this unit to wet or humid
environments as this may damage electrical
components.
Do not store this unit in the open air. Do not stack
unpackaged units.
Do not use this unit to store food, plants, precision
instruments, artwork etc.
To operate the unit for the rst time, exhaust the
air in the coil; otherwise, the performance may be
compromised.
Clean the inside of the water pipe before use.
Remember to implement anti-freezing measures
for coil in winter. For details, please refer to anti-
freezing instructions herein.
Keep the unit energized even if it is not in service
over a long period.
Adopt self-protection measures when you install,
maintain or clean the unit.
Do not press the unit. Handle it carefully as any
damages may cause unit malfunction.
Reserve enough space for installation and
maintenance.
Before installation, check whether the unit is
reliably grounded. Otherwise, do not proceed with
the installation. In no circumstances can the earth
line for main power switch be disconnected.
Rotate the fan impeller during installation. Contact
the manufacturer if you hear any abnormal noises.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KFC-S2E-2T-250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KFC-S2E-2T-250D in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info